Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
July 6th, 2019, 11:10 PM   #1
Junior Member
 
Joined: Apr 2019
From: Wigan

Posts: 4
Thanks: 1

I Ride:
Neutral Problem

Morning everyone,

Just a little niggly problem that I have been having recently, riding my 2004 FE450 on some lanes/roads yesterday and more often than not in the low gears the bike would sometimes randomly knock itself into neutral. It was fine once you got up to third and you was going some pace but first and second gear was a nightmare! Going into neutral up some big hills isnít fun! Any ideas please?
Wiganberg is offline  
 
July 7th, 2019, 03:15 AM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,732
Thanks: 456

I Ride: Husaberg FE501e 2003
I don't have an answer but the problem is likely to be something to do with the selector arm situated behind the clutch. there is a sliding claw that can get bound up because the metal spreads out and binds where it keeps smashing into the pins.

Taffy
Taffy is offline  
July 8th, 2019, 11:57 AM   #3
Junior Member
 
Joined: Apr 2019
From: Wigan

Posts: 4
Thanks: 1

I Ride:
Thanks for the heads up, it’s really frustrating to be honest with you and actually dangerous when doing hill climbs and stuff! Hopefully I can sort it
Wiganberg is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
neutral, problem



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Can't get bike in neutral 650Pilot Mechanical 10 November 16th, 2015 10:31 AM
My 550 supermoto don't want to go neutral raxhi Mechanical 12 August 4th, 2015 04:39 PM
Neutral selecting Foilopog Mechanical 10 August 21st, 2009 08:04 AM
Neutral? BILLTECH Mechanical 15 November 23rd, 2005 06:40 PM
Neutral??? kez Mechanical 12 November 4th, 2004 12:41 AM


Facebook Twitter Google+ RSS Feed