Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
July 3rd, 2019, 10:05 PM   #1
Senior Member
 
fe600racer's Avatar
 
Joined: Jun 2004
From: australia

Posts: 391
Thanks: 15

I Ride:
Clutch bleeding 2008 bikes

Who as a good way of bleeding 2008 clutch master cylinder. I use the syringe to push oil up and then flick lever.....ride and flick lever.....clutch works great but on examination and lever actuation small bubbles?

Not bleed properly or is air getting in somewhere....clutch good nut wondering if could be better.....what do you think?thinking
fe600racer is offline  
 
July 4th, 2019, 12:54 AM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,732
Thanks: 456

I Ride: Husaberg FE501e 2003
well yes, doing that flicks the air out but they have always had as much trouble getting the oil IN as they have had in getting the air OUT!!!!

if it continues, you have a leak at a connection. I lost the original thin black plastic pipe very early on at a race...when else!!

Taffy
Taffy is offline  
July 4th, 2019, 06:58 AM   #3
Senior Member
 
fe600racer's Avatar
 
Joined: Jun 2004
From: australia

Posts: 391
Thanks: 15

I Ride:
Thanks Taffe. Any others looked at this.

Note. As I have time I have also heated and bent the clutch lever to have the bend curve touch handle bars. Again I have been used to clicking nuetral but the extra pull I am testing for better clutch performance. Clutch rattle seems reduced with clutch oil correctly set and blend. Fyi.
fe600racer is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
2008, bikes, bleeding, clutch



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bleeding Clutch FE 390 Knobby Husaberg 2 May 9th, 2014 12:51 PM
Bleeding a Clutch rwhite148f Mechanical 12 May 12th, 2013 11:00 AM
Clutch Bleeding FE650 userslo Mechanical 6 November 16th, 2012 02:59 AM
Bleeding Clutch... aardvark Mechanical 4 June 22nd, 2010 04:01 AM
clutch adjustment/bleeding 2ndtimeround Husaberg 2 January 15th, 2006 04:38 AM


Facebook Twitter Google+ RSS Feed