Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
March 26th, 2019, 10:39 AM   #11
Member
 
Joined: Oct 2018
From: Isle of Wight

Posts: 31
Thanks: 0

I Ride: husa fe650e bandit 1200 sold z1000 gen 1 sold z1000 gen 2 sold vfr400 sold xr650r sold striple r sol
Originally Posted by fe600racer View Post
Can you ride the bike in gear ... in a high gear....on a road would be good. Listen for the noise which I think you will hear. Pull the clutch all the way in and coast and see if you can hear the noise....I think you won't......next ride under constant throttle and listen for the noise then pull clutch in until it just disengages and see if noise goes away then let clutch out and see if noise comes back.....that is see if you can control the noise on and off with the clutch. If you can then I may know what it is....if you can't then I am on the wrong track. Let us know. PS. Not easily finding nuetral is normal and not related to the problem.
Thanks I'll try this and let you know
Jayyyxxx11 is offline  
 
April 9th, 2019, 02:30 AM   #12
Member
 
Joined: Oct 2018
From: Isle of Wight

Posts: 31
Thanks: 0

I Ride: husa fe650e bandit 1200 sold z1000 gen 1 sold z1000 gen 2 sold vfr400 sold xr650r sold striple r sol
Originally Posted by fe600racer View Post
Can you ride the bike in gear ... in a high gear....on a road would be good. Listen for the noise which I think you will hear. Pull the clutch all the way in and coast and see if you can hear the noise....I think you won't......next ride under constant throttle and listen for the noise then pull clutch in until it just disengages and see if noise goes away then let clutch out and see if noise comes back.....that is see if you can control the noise on and off with the clutch. If you can then I may know what it is....if you can't then I am on the wrong track. Let us know. PS. Not easily finding nuetral is normal and not related to the problem.
Hello
You're right in what you was saying, the noise goes away without throttle.
What do you think may be the cause?
Jayyyxxx11 is offline  
April 9th, 2019, 04:37 PM   #13
Senior Member
 
fe600racer's Avatar
 
Joined: Jun 2004
From: australia

Posts: 358
Thanks: 11

I Ride:
Try this link

02 ktm 520 clutch noise??? - dbw - dirtbikeworld.net Members Forums

Could be normal Berg noise or loose nut etc.

Try putting on stand in sixth gear with plug out and mate turning wheel with clutch inspection cover off and see if you can isolate the noise.
fe600racer is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
noise, open, rattling, throttle



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
2003 fe400 throttle stuck wide open 2003berg Mechanical 2 May 23rd, 2014 11:44 PM
Starting with open throttle FS 650 2002 Husaden Fuel 5 September 3rd, 2009 10:43 AM
Engine stops when I open throttle quickly alepos Fuel 11 February 11th, 2008 12:27 PM
sudden rattling noise oyk Mechanical 12 June 29th, 2007 07:16 PM
BOG (engine dies snapping throttle open @ low revs) FirstEliminator Fuel 20 September 6th, 2004 07:21 AM


Facebook Twitter Google+ RSS Feed