Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
February 24th, 2019, 09:40 AM   #1
Member
 
Joined: Oct 2018
From: Isle of Wight

Posts: 32
Thanks: 0

I Ride: husa fe650e bandit 1200 sold z1000 gen 1 sold z1000 gen 2 sold vfr400 sold xr650r sold striple r sol
Speedo won't work on new brake disc

I can't afford a new Beringer disc so purchased an EBC but even though I have adjusted the sensor for the speedo, it still won't pick up the speed.
Any help would be much appreciated
Jayyyxxx11 is offline  
 
February 24th, 2019, 10:10 AM   #2
Member
 
Joined: Feb 2017
From: Southern, Indiana

Posts: 72
Thanks: 21

I Ride: 2011 Husaberg FE390, KTM 990 Adventure
Does the brake disc have the magnet installed for the speedo sensor to detect?
jdubb75 is offline  
February 24th, 2019, 10:32 AM   #3
Member
 
Joined: Oct 2018
From: Isle of Wight

Posts: 32
Thanks: 0

I Ride: husa fe650e bandit 1200 sold z1000 gen 1 sold z1000 gen 2 sold vfr400 sold xr650r sold striple r sol
It didn't come with one
Jayyyxxx11 is offline  
February 24th, 2019, 11:52 AM   #4
Member
 
Joined: Feb 2017
From: Southern, Indiana

Posts: 72
Thanks: 21

I Ride: 2011 Husaberg FE390, KTM 990 Adventure
Originally Posted by Jayyyxxx11 View Post
It didn't come with one
You will have to install one for the speedo sensor to have something to pickup. It may be already pre-drilled for one and that would make things a lot easier.
jdubb75 is offline  
February 24th, 2019, 12:25 PM   #5
Member
 
Joined: Oct 2018
From: Isle of Wight

Posts: 32
Thanks: 0

I Ride: husa fe650e bandit 1200 sold z1000 gen 1 sold z1000 gen 2 sold vfr400 sold xr650r sold striple r sol
Ok, any magnet should work shouldn't it?
Does it have to be in line with the sensor? As the pre drilled part of the disc wouldn't be in line with the sensor
Thanks btw
Jayyyxxx11 is offline  
February 24th, 2019, 12:32 PM   #6
Member
 
Joined: Feb 2017
From: Southern, Indiana

Posts: 72
Thanks: 21

I Ride: 2011 Husaberg FE390, KTM 990 Adventure
Originally Posted by Jayyyxxx11 View Post
Ok, any magnet should work shouldn't it?
Does it have to be in line with the sensor? As the pre drilled part of the disc wouldn't be in line with the sensor
Thanks btw
You might be able to remove and re-use the one in your old disc. If you search for motorcycle speedo magnets (or similar) you will see some options. They are usually 10mm dia. with a groove for a circlip to hold them in place. And yes, it needs to be pretty close to being in line with the sensor. You can always try one in the pre drilled location and see it if triggers the speedo when you rotate the wheel.
jdubb75 is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
brake, disc, speedo, work



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS650 '04 front brake replacement disc AndreasB Wheels and Tires 3 October 12th, 2013 04:41 AM
Front brake disc 310mm FS userslo Wheels and Tires 13 August 4th, 2012 08:45 AM
Front brake disc. Roadrunner Husaberg 2 May 19th, 2012 06:49 AM
Front brake disc guard wthemechanic Tech 2 October 4th, 2011 06:51 AM
Front Brake Disc & Lever Kawasakifreak Husaberg 1 February 23rd, 2011 12:21 PM


Facebook Twitter Google+ RSS Feed