Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
October 8th, 2019, 06:11 AM   #11
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,753
Thanks: 458

I Ride: Husaberg FE501e 2003
that primary gear is fine. just use a 4" grinderette and a P40 disc. just zap anything high. if it's high it gets it. lows....don't worry.

I had that gear assessed years ago. I asked what was the narrowest i could run that gear with 100bhp and the man said 9mm. 8mm if it was a 1-piece crank but 9mm for a split crank.

that gear is 13mm wide so 50% too good for 100bhp and probably 80% too big for 60bhp.

feel better now!

Taffy
Taffy is offline  
 
October 8th, 2019, 06:30 AM   #12
Moderator
 
ned37's Avatar
 
Joined: Dec 2004
From: back in cottonwood, az

Posts: 2,353
Thanks: 203

I Ride: '08 HUSKY te610
sounds like loose valve to me. check the cam follower bearings.
ned37 is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
2008, engine, fe550, husaberg, noise



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
3L of engine oil in a Husaberg 2008!!! polska Motorcycle Talk 31 May 28th, 2018 06:32 AM
2008 Husaberg FE550 Good buy? Parry Husaberg 9 March 17th, 2018 12:26 PM
'86 KTM 500 MXC engine in 2008 husaberg frame craigsit Husaberg 4 March 1st, 2017 01:52 PM
For Sale: 2008 Husaberg FE550 camplamp Classifieds 1 October 3rd, 2016 06:11 PM
04 fe550 developing engine noise enginenumber Mechanical 5 September 12th, 2006 07:45 AM


Facebook Twitter Google+ RSS Feed