Husaberg Forum

Husaberg Forum (
-   Mechanical (
-   -   2008 Husaberg FE550 engine noise (

Taffy October 8th, 2019 06:11 AM

that primary gear is fine. just use a 4" grinderette and a P40 disc. just zap anything high. if it's high it gets it. lows....don't worry.

I had that gear assessed years ago. I asked what was the narrowest i could run that gear with 100bhp and the man said 9mm. 8mm if it was a 1-piece crank but 9mm for a split crank.

that gear is 13mm wide so 50% too good for 100bhp and probably 80% too big for 60bhp.

feel better now!


ned37 October 8th, 2019 06:30 AM

sounds like loose valve to me. check the cam follower bearings.

All times are GMT -8. The time now is 02:47 PM.

Copyright © 2020 Husaberg Forum. All rights reserved.