Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs

Thanks Tree5Thanks
LinkBack Thread Tools Display Modes
October 17th, 2018, 08:29 PM   #11
Senior Member
Dr_C's Avatar
Joined: Oct 2003
From: Sweden

Posts: 893
Thanks: 1021

I Ride: Husaberg Supermono, Ducati 888sp5
Originally Posted by bushmechanic View Post
Mine Varies 1.98 to 2.10mm no paint

Have you got a screenshot of the cad model of the frame ?
Ok. 2,0mm it is! Thank you!
No complete model of the final (?) design yet. Basically: One tube downwards from the steering head, to keep clear of the exhaust. Split into two tubes for a cradle beneath the engine. The two tubes will also hold the swing arm and come up and join the rectangular central tube at its rear end. Then of course reinforcements and additional tubes here and there!

Skickat från min SM-A520F via Tapatalk
Thanks from bushmechanic, ede and paolo6
Dr_C is offline  

  Husaberg Forum > Mechanical and Technical > Mechanical

2001, frame, thickness

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
What engine other than husaberg will fit my frame husaberg 400 2001 lukaszmajax Husaberg 3 August 21st, 2018 12:49 AM
Want To Buy: 2001-2008 road legal husaberg frame EU worstinfinland Want To Buy 3 May 26th, 2016 03:36 AM
Want To Buy: Look for a 650 frame 2001-2004 Lukechaz Want To Buy 2 April 3rd, 2014 06:59 AM
Shim thickness, MV mikaels Suspension 18 November 11th, 2008 01:50 PM
gasket thickness' Taffy Mechanical 5 April 29th, 2008 09:19 AM

Facebook Twitter Google+ RSS Feed