Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
July 15th, 2018, 06:21 PM   #1
Member
 
Lancer's Avatar
 
Joined: Aug 2017
From: Australia

Posts: 36
Thanks: 10

I Ride: Husaberg FE570
FE 570 Primary Gear Puller

I have to replace the countershaft and see there is a puller needed to remove the Primary Gear. I am going to turn one up and wanted to ask if anyone knows what the thread is......I have read somewhere they thought it was 40 x 1.5mm but were not sure

Thanks

Lance
Lancer is offline  
 
July 17th, 2018, 03:50 PM   #2
Member
 
Lancer's Avatar
 
Joined: Aug 2017
From: Australia

Posts: 36
Thanks: 10

I Ride: Husaberg FE570
For those of you interested the thread on the Primary Gear is 36 x 1.5

Regards

Lance
Lancer is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
570, gear, primary, puller



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Rattle, Primary Gear Nut ? khelton Mechanical 10 February 15th, 2010 06:49 PM
Cracked primary gear Huspee Mechanical 14 July 8th, 2009 12:58 AM
Broken Primary gear KTM125sx Mechanical 7 March 30th, 2009 08:18 AM
Primary Drive Gear and Loctite steve Tech 2 April 23rd, 2007 07:27 PM
Gear Puller Aussieforce Mechanical 7 December 23rd, 2006 02:53 AM


Facebook Twitter Google+ RSS Feed