Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Thanks Tree1Thanks
  • 1 Post By lesjive
Reply
 
LinkBack Thread Tools Display Modes
May 14th, 2018, 02:37 AM   #1
Senior Member
 
Joined: Feb 2018
From: Roy, WA

Posts: 133
Thanks: 16

I Ride: 08' FE 450 Husaberg
Fuel fitting o rings

Okay, so my carb was leaking fuel , so I pulled the phillips screw & easily extracted the brass fitting w/way worn out o rings (3) .
I stopped at the KTM shop locally, no go.
I ordered the kit from fleybay & it got lost in the mail.
I really want to ride this bike !
So beings its fuel im sure a viton or whatnot needs to be used.
Im sure w/all the fuel injection & fuel o rings my Napa would have them.
Just need to know the proper size as im looking for no fuel failure !

Thanks in advance---Proflow
proflow is offline  
 
May 15th, 2018, 05:40 AM   #2
Member
 
Joined: Jan 2011
From: N. Cal

Posts: 70
Thanks: 5

I Ride: fe450
I had the same problem.
Got the O rings from jetsrus..
Part # 85, you need three of them.
FCR-MX EXPLODED VIEW
Thanks from proflow
lesjive is offline  
May 17th, 2018, 10:10 PM   #3
Senior Member
 
Joined: Feb 2018
From: Roy, WA

Posts: 133
Thanks: 16

I Ride: 08' FE 450 Husaberg
K, im going to do the napa viton thing as I dont want to wait any more. I'll bring the fitting & the old o-rings to compair. Im thinking just go a very larger than the existing, grease um up & hope for the best !
proflow is offline  
May 17th, 2018, 11:08 PM   #4
Senior Member
 
husabutt's Avatar
 
Joined: Feb 2003
From: Escondido, Ca. USA

Posts: 3,024
Thanks: 293

I Ride: 2005 Fe450,2001 Fx470,1997 Fx600
Harbor Freight Tools seems to be everywhere nowadays and has unbelievable prices.

For $10 you can get a whole assortment. Problem with these sets is that the O-rings are usually too thick. You may be able to use a slight undersize and stretch it on.

https://www.harborfreight.com/180-pi...kit-67525.html

You can also use HNBR o-rings with gasoline.

https://www.harborfreight.com/205-pi...kit-67644.html

Sudco usually has everything in stock and ships fast.

http://www.sudco.com/keihin_carburetors_diagrams.html


Last edited by husabutt; May 17th, 2018 at 11:10 PM.
husabutt is offline  
May 18th, 2018, 03:48 AM   #5
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,446
Thanks: 403

I Ride: Husaberg FE501e 2003
I have them in stock.

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
fitting, fuel, rings



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
O-Rings webmonstro Mechanical 3 July 4th, 2016 12:55 AM
Fuel Line Fitting Fix bkowal Fuel 0 May 8th, 2012 11:32 AM
2011 570 Fuel Line quick connect fitting Kiwivet Fuel 5 February 2nd, 2011 09:26 PM
Fitting 2010 low fuel light to 09 FE570?????????????????? Rip'n'Shred Electrical 1 October 27th, 2009 05:25 AM
O-rings mikst Mechanical 3 October 27th, 2004 11:39 AM


Facebook Twitter Google+ RSS Feed