Magura hydrolic clutch oil

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Mar 13, 2018
Messages
22
Location
Lisbon, Portugal
Hello Husaberg Forum

The Clutch on my 07 FE450 is getting lazy.. is not fully disengaging..

so i'm going to start of by bleeding the sistem .. with mineral oil..

would you think 10W fork oil could also work?? ( its red and mineral)

Thanks guys

Vasco
Lisbon, Portugal
 
if you want to ensure a closer match to the expensive OEM stuff check the tech specs for of the brand of fork oil you can buy locally - Husaberg is ISO VG(15)

Different brands can have different ISO ratings for the "same" W ie one brand 5W another 10W,

Naturally on the various forums people use everything from sewing machine light oil through Pentosin to OEM Magura (and everything in between such as baby oil) so I might be overthinking this...

From memory here in Australia Castrol 5W fork oil is the same viscosity.
 
I use medical grade mineral oil from the pharmacy. It is the same stuff without the colouring and much cheaper.
 
I'm spoiled I only use Magura Blood oil. It has given me the best clutch feel over other mineral based oils.
 
When in a pinch, for what it's worth, I used atf for the husaberg clutch system (hymec 167). Has been working fine for a few months now.
Still planning to switch to the right magura stuff. Magura and Shimano both use mineral oil so any bike shop dealing with mountain bikes should have it.
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top