Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
March 14th, 2018, 08:39 AM   #1
Junior Member
 
Joined: Jan 2018
From: British Columbia

Posts: 20
Thanks: 0

I Ride:
06fe550 motor rebuild after 10 hours?

Bought my 06fe550 7 months ago in good shape and only put 4 hours on it before the performance of the bike declined. Its my only source of transportation, trying to fix a minor issue has been a second job for two months (dies and bogs down when throttling fast or at 1/8s) i have to learn every bolt on a motor just to ride husaberg? If anyone can help me get my bike going ill etransfer you 100 dollars pretty sure its any easy fix i just dont have time to go to school for mechanics right now
husaberghale is offline  
 
March 14th, 2018, 11:57 AM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,430
Thanks: 399

I Ride: Husaberg FE501e 2003
it'll be your fuel screw under the carb. you need to be able to adjust this. it could be a blocked PJ in the carb (well under it actually). but it is the pilot circuit and you need to be able to adjust this either in OR out.

Taffy
Taffy is offline  
March 17th, 2018, 01:44 PM   #3
Junior Member
 
Joined: Jan 2018
From: British Columbia

Posts: 20
Thanks: 0

I Ride:
cleaned the pilot jet with a piece of copper wire and screwed it back in all the way, tried lots of kicks with air mixture screw at 0 1/2, 1, 1 1/2, 2, 2 1/2, 3,3 1/2 all the way to 5 turns out but still dosnt want to start, had it going yesterday but never wants to go when i go back to it. when i had it running i screwed the air mixture screw in then almost out all the way and bike was still running, do i need to adjust valves? Thanks
husaberghale is offline  
March 17th, 2018, 02:44 PM   #4
Junior Member
 
Joined: Jan 2018
From: British Columbia

Posts: 20
Thanks: 0

I Ride:
it was starting first kick after i played with it yesterday, started good last night after i changed the oil again. then wouldnt start this morning
husaberghale is offline  
March 17th, 2018, 03:32 PM   #5
Senior Member
 
Joined: May 2016
From: Portugal

Posts: 119
Thanks: 24

I Ride: Husaber FE 400 E 1998, Suzuki DR 350 SE 1998, XT 350 1992
Originally Posted by husaberghale View Post
it was starting first kick after i played with it yesterday, started good last night after i changed the oil again. then wouldnt start this morning
Check the plug see how it looks then show us



Nuno
webmonstro is offline  
March 21st, 2018, 01:09 AM   #6
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,430
Thanks: 399

I Ride: Husaberg FE501e 2003
what's the word now on this Hale?

taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
06fe550, hours, motor, rebuild



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
TE300 Top End Rebuild, how many hours? dag19 Mechanical 19 February 3rd, 2016 03:22 PM
Motor rebuild? Who can do it? Daytonatriumph675 Tech 4 October 22nd, 2011 09:19 AM
What to change in the motor at 140 hours rozzer Mechanical 12 September 25th, 2010 04:04 PM
Expected Durability(Hours) of Husaberg 4 Stroke Motor husapye Mechanical 4 June 13th, 2010 08:34 PM
How many hours before a rebuild??? acyr Husaberg 7 September 17th, 2004 07:19 PM


Facebook Twitter Google+ RSS Feed