Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Thanks Tree6Thanks
Reply
 
LinkBack Thread Tools Display Modes
March 12th, 2020, 01:00 PM   #21
Junior Member
 
Joined: Nov 2019
From: Bulgaria

Posts: 2
Thanks: 0

I Ride: Husaberg fe390
I use to have issues with power supply on fuel pump.
After a lot of measurements found that the ecu is giving only 4v to fuel pump. Now the pump is connected to fuse 4 and is working ok but some times still stall.
jbpetkov is offline  
 
March 13th, 2020, 11:21 AM   #22
Junior Member
 
Joined: Jul 2016
From: The Netherlands, somewhere in the middle

Posts: 19
Thanks: 15

I Ride: FE390 2010
This sounds like a bottom up check:
- Wires not broken
- Fuel-filters not blocked
- Air-box not leaking
- central computer not broken
When all of these are OK ignition wiring and ignition coil could be bad.
Beyond that it becomes interesting
Thanks from TavisB
Ook Peter is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
fe390, issue, stalling, weird



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fe 450 210 - weird clutch issue Flip6 Mechanical 2 January 22nd, 2018 08:58 PM
fe390 stalling and won't restart, fuel filters? wowboyz Fuel 1 January 21st, 2016 11:13 PM
FE390 2011 Stalling Rich T Fuel 15 September 2nd, 2010 04:28 AM
Weird...check this out... AJSB Husaberg 3 October 13th, 2006 07:36 AM
weird dellorto... oyk Fuel 7 March 25th, 2005 12:00 PM


Facebook Twitter Google+ RSS Feed