Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Thanks Tree3Thanks
  • 2 Post By TomTom
  • 1 Post By TomTom
Reply
 
LinkBack Thread Tools Display Modes
November 17th, 2017, 10:57 AM   #1
Senior Member
 
Joined: Nov 2012
From: Sweden

Posts: 437
Thanks: 349

I Ride: HB 570 FE
Checking my 09 570 engine.

Im well aware they last forever sorta, but shes an ice riding girl and a lot more upper rpm riding than trail. To be safe its being rebuilt for the races this winter. Nothing found on the oil-magnet draining the oil.
You got to love the 70 degree wrenchability if theres such a word, engine out in 2,5 hours.
Thanks from tourist and Alan
TomTom is offline  
 
November 19th, 2017, 11:05 AM   #2
Senior Member
 
Joined: Nov 2012
From: Sweden

Posts: 437
Thanks: 349

I Ride: HB 570 FE
Nothing bad found, water pump axle had a mark in it due someone doing a bad diy job (weeping a tad) so needs replacing and the cam chain tensioner was not working properly, ie chain wasnt properly tensioned. So new chain + guides and waterpump livery was all, all else fine. Gearbox, piston, crank, main bearings all ok.
Bloody amazing after all this engine has been trough
Total runtime 250 hours and 100 of those ice racing.

Its lightened too, around 60kgs as it stands:

Thanks from paolo6

Last edited by TomTom; November 19th, 2017 at 12:12 PM.
TomTom is offline  
November 19th, 2017, 01:52 PM   #3
Senior Member
 
Joined: Nov 2011
From: Nordic countries

Posts: 952
Thanks: 402

I Ride: Two FE570 -12
Did you take the engine to Gert or do you deem it good enough as is?
jon andersson is offline  
November 19th, 2017, 02:04 PM   #4
Senior Member
 
Joined: Nov 2012
From: Sweden

Posts: 437
Thanks: 349

I Ride: HB 570 FE
Originally Posted by jon andersson View Post
Did you take the engine to Gert or do you deem it good enough as is?
Its at Gert alright
TomTom is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
570, checking, engine



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Checking mains Kayeffess Mechanical 1 October 30th, 2014 03:17 AM
Rebuilding Engine, checking mains, rod... VIDEOS hyebo Mechanical 0 May 10th, 2013 09:16 AM
Just checking in and asking questions ENFORCER4 Husaberg 4 April 10th, 2010 05:14 PM
OEM fan checking that it works fe600racer Cooling Systems 5 May 19th, 2009 06:21 AM
Newbie here checking in with a ? toxicdump Husaberg 0 July 24th, 2008 05:29 PM


Facebook Twitter Google+ RSS Feed