Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Thanks Tree114Thanks
Reply
 
LinkBack Thread Tools Display Modes
August 23rd, 2018, 09:15 PM   #131
Senior Member
 
Joined: Nov 2011
From: Nordic countries

Posts: 1,051
Thanks: 475

I Ride: Two FE570 -12
I was thinking if you slapped in the other crank to see if it changes.
jon andersson is offline  
 
August 23rd, 2018, 09:43 PM   #132
Senior Member
 
Alan's Avatar
 
Joined: Jul 2016
From: Australia, Beechworth, Vic.

Posts: 418
Thanks: 211

I Ride: when I can which isn't often enough. FX450, FE570
What I was thinking is getting a 78mm crank off ThumperRacing. It would then complete a 660 with all the parts I have, oh I’d need another piston kit as those cranks run a 19mm pin from memory. My 610 kits I have here are 20mm pins. I have a 570 motor here with a blown crank. I could do the 660conversion to it. Also I bought a KTM conrod repair kit for this blown crank. It would give me two 610’s and a 660.
Alan is offline  
August 24th, 2018, 12:46 AM   #133
Senior Member
 
Alan's Avatar
 
Joined: Jul 2016
From: Australia, Beechworth, Vic.

Posts: 418
Thanks: 211

I Ride: when I can which isn't often enough. FX450, FE570
I found the vibration. Itís the handlebars. When you place a finger on the triples, virtually no vibration. Same anywhere over the bike.


Sent from my iPad using Tapatalk
Alan is offline  
August 25th, 2018, 03:27 AM   #134
Senior Member
 
Alan's Avatar
 
Joined: Jul 2016
From: Australia, Beechworth, Vic.

Posts: 418
Thanks: 211

I Ride: when I can which isn't often enough. FX450, FE570
Out for the run in today. Well that lasted all for 1/2 an hour, then into it. Beaut day for it. Getting a sniff of Spring. The 610 with the current mods is one nice motor. My problem has always been ĎI want moreí. Today proved that the 610 can be too much. Not that Iím having troubles handling it. I would like more. Just that there isnít a lot of traction the bigger you go. Iíve never been about going fast, even though I donít have troubles doing so, just that Iím all about having fun. This is where this bike excels. This bike will lift like no other. Awesome fun.






Sent from my iPad using Tapatalk
Alan is offline  
August 25th, 2018, 03:53 AM   #135
Senior Member
 
tourist's Avatar
 
Joined: Nov 2012
From: Iceland

Posts: 2,275
Thanks: 721

I Ride: 1 Berg, 1 Zook
Yesssss!!!

re. bar vibes: Mine had these on it when I bought it: https://www.ktm-parts.com/SXS14125200.html

They seem very nice. No vagueness. Haven’t tried without.
tourist is offline  
August 25th, 2018, 04:56 AM   #136
Senior Member
 
Alan's Avatar
 
Joined: Jul 2016
From: Australia, Beechworth, Vic.

Posts: 418
Thanks: 211

I Ride: when I can which isn't often enough. FX450, FE570
Originally Posted by tourist View Post
Yesssss!!!

re. bar vibes: Mine had these on it when I bought it: https://www.ktm-parts.com/SXS14125200.html

They seem very nice. No vagueness. Havenít tried without.
Sorry mate, it still vibrates way too much. The ride today confirmed it. Itís going to have to stay like this for quite some time. Got other projects to do.

Be buggered if I know what could be causing it though.
Alan is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
big, bores, degrees



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
70 degrees sub frame walter27 Fuel 4 April 22nd, 2017 12:33 AM
Want To Buy: 70 degrees parts husadady Want To Buy 1 March 11th, 2017 12:53 PM
70 DEGREES MAP SWITCH scooter29 Electrical 8 November 21st, 2012 11:37 PM
180 Degrees out??? Austin Mechanical 6 November 22nd, 2010 05:53 PM
I'm sorry, but it was 40 degrees outside. Supermototeam Husaberg 12 December 6th, 2004 10:25 PM


Facebook Twitter Google+ RSS Feed