Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Thanks Tree9Thanks
  • 4 Post By Noubazor
  • 1 Post By Alan
  • 2 Post By Alan
  • 2 Post By Noubazor
Reply
 
LinkBack Thread Tools Display Modes
August 12th, 2017, 06:08 PM   #1
Junior Member
 
Joined: Aug 2017
From: Australia

Posts: 17
Thanks: 1

I Ride:
FE570 Top End Rebuild

I read the manual and it doesn't cover whether the engine has to be removed from the frame or not to remove and rebuild the top end

Thanks
Lancer is offline  
 
August 12th, 2017, 09:45 PM   #2
Junior Member
 
Joined: May 2015
From: Belgium

Posts: 13
Thanks: 21

I Ride:
Hello,

Yes it is possible to do it with the motor on the motorcycle
Noubazor is online now  
August 13th, 2017, 01:26 AM   #3
Senior Member
 
Alan's Avatar
 
Joined: Jul 2016
From: Australia, Beechworth, Vic.

Posts: 170
Thanks: 70

I Ride: when I can which isn't often enough. FX450, FE570
I did my 450 recently with engine still fitted. I haven't measured the barrels between the 450 and 570 to see if there is any length difference.
Thanks from Lancer
Alan is offline  
August 13th, 2017, 01:42 AM   #4
Junior Member
 
Joined: Aug 2017
From: Australia

Posts: 17
Thanks: 1

I Ride:
Thanks.....That'll cut out a lot of work!!!
Lancer is offline  
August 13th, 2017, 05:14 AM   #5
Senior Member
 
Alan's Avatar
 
Joined: Jul 2016
From: Australia, Beechworth, Vic.

Posts: 170
Thanks: 70

I Ride: when I can which isn't often enough. FX450, FE570
When you do the rebuild, use a wide cable tie to hold the rings in. Fit the piston to the conrod first not in the barrel otherwise it's very tight trying to fit the pin circlip.
Thanks from jon andersson and Lancer
Alan is offline  
August 13th, 2017, 06:29 AM   #6
Junior Member
 
Joined: May 2015
From: Belgium

Posts: 13
Thanks: 21

I Ride:
450/570 no problem
Thanks from Alan and Lancer
Noubazor is online now  
August 13th, 2017, 10:48 PM   #7
Junior Member
 
Joined: Aug 2017
From: Australia

Posts: 17
Thanks: 1

I Ride:
Originally Posted by Alan View Post
When you do the rebuild, use a wide cable tie to hold the rings in. Fit the piston to the conrod first not in the barrel otherwise it's very tight trying to fit the pin circlip.
Thanks Alan
Lancer is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
end, fe570, rebuild, top



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
approx FE570 miles before valves, top end rebuild etc? hoosie5seventy Mechanical 53 April 30th, 2017 01:19 AM
TE 300 Top End rebuild hawkdriver623 Mechanical 5 November 14th, 2016 10:43 AM
650 Rebuild! LemoneyF Mechanical 58 November 11th, 2015 02:58 AM
2009 FE570 clutch MC rebuild berglsmerg Mechanical 15 May 14th, 2015 11:55 PM
Rebuild or not rebuild - that is the question! Coastie Mechanical 20 August 9th, 2007 01:17 PM


Facebook Twitter Google+ RSS Feed