Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
July 23rd, 2017, 07:30 AM   #1
Junior Member
 
Joined: Apr 2015
From: Copenhagen

Posts: 29
Thanks: 8

I Ride:
Counter balancer bearing replacement

Hey husabergers,

I am replacing my counter balancer bearings, and as i see my bike only has 1 bearing and not the double bearing. I have bought 2 custom made bearings from orangeberg, but i cannot remove my current bearing. I have warmed up my counterbalancer to around 170 degrees celcius, but still cannot knock it out. Does it have to be pressed, or is there another easy way to do it? Is it only able to go out one way?

Hope you can help.
Thanks, Christian.
badsted is offline  
 
July 23rd, 2017, 10:58 AM   #2
Senior Member
 
Dr_C's Avatar
 
Joined: Oct 2003
From: Sweden

Posts: 788
Thanks: 619

I Ride: Husaberg Supermono, Ducati 888sp5
If I remember correctly, that version has the bearing locked into place axially by a welded sleeve. Is there a small laser-weld, some 3 mm further out radially, from the outer ring on one side of the CB?
Dr_C is offline  
July 23rd, 2017, 11:27 AM   #3
Junior Member
 
Joined: Apr 2015
From: Copenhagen

Posts: 29
Thanks: 8

I Ride:
Yes it actually looks like it! How do i replace this with my double bearings i've got? is it even possible..

Thanks
badsted is offline  
July 23rd, 2017, 11:43 AM   #4
Senior Member
 
Dr_C's Avatar
 
Joined: Oct 2003
From: Sweden

Posts: 788
Thanks: 619

I Ride: Husaberg Supermono, Ducati 888sp5
At the time, you needed to buy a whole new CB if the bearing seized, and it did...
Everything is possible, but I think it will take a lot of machining. Are new CB available as spare part?
Dr_C is offline  
July 23rd, 2017, 12:09 PM   #5
Junior Member
 
Joined: Apr 2015
From: Copenhagen

Posts: 29
Thanks: 8

I Ride:
Oh well, seems like a new CB would be what i need then..

It should be this part no. i guess:
80030057100

Can you confirm that?

Thanks for the help.
badsted is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
balancer, bearing, counter, replacement



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Counter balancer bearing (again) Huehnerhabicht Mechanical 1 May 20th, 2008 12:30 AM
counter-balancer bearing Taffy Mechanical 36 January 31st, 2008 03:34 AM
counter balancer bearing? jrs1cycle Mechanical 4 August 6th, 2007 07:43 PM
Counter balancer bearing bpikeuk Mechanical 10 July 26th, 2006 09:25 AM
replacing counter balancer bearing dave186 Mechanical 4 May 10th, 2004 01:12 PM


Facebook Twitter Google+ RSS Feed