Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
June 10th, 2017, 10:57 AM   #1
Junior Member
 
Joined: Feb 2010
From: Portugal

Posts: 8
Thanks: 1

I Ride:
Torque limiter FE650 measures

I wonder if anyone can give me the exact measure from top to top of the torque limiter in the picture below.
It's a FE 650 2007 model

Thanks a lot
Attached Thumbnails
Torque limiter FE650 measures-dscf0607.jpg  

Last edited by Merlow; June 10th, 2017 at 11:00 AM.
Merlow is offline  
 
June 13th, 2017, 02:28 PM   #2
Senior Member
 
bushmechanic's Avatar
 
Joined: Jun 2007
From: south east WA Australia

Posts: 3,750
Thanks: 1047

I Ride: 2008 700FK, 2002 628FST
Sorry i don't have one to measure

Are you. Replacing the fibre clutch plate inside ?
bushmechanic is offline  
June 14th, 2017, 01:39 AM   #3
Senior Member
 
canolman's Avatar
 
Joined: Sep 2013
From: canolbarth cymru

Posts: 284
Thanks: 161

I Ride:
Mine measures 34.85mm. Mine has a shim fitted to stop it slipping, sorry I can't remember what thickness that was added but was minimal, 0.3 possibly?
canolman is offline  
June 15th, 2017, 12:27 AM   #4
Junior Member
 
Joined: Jan 2017
From: Brisbane

Posts: 8
Thanks: 0

I Ride:
34.92 from 05 550
76model is offline  
June 16th, 2017, 01:12 PM   #5
Junior Member
 
Joined: Feb 2010
From: Portugal

Posts: 8
Thanks: 1

I Ride:
I tried to give more torque and the screw broke up. Then, the fastest solution is tig welding it.

After the work is done a can post some fotos in order to help someone in my situation

Thank you for the measures
Merlow is offline  
June 16th, 2017, 01:48 PM   #6
Senior Member
 
bushmechanic's Avatar
 
Joined: Jun 2007
From: south east WA Australia

Posts: 3,750
Thanks: 1047

I Ride: 2008 700FK, 2002 628FST
Good idea merlow. I did the same. One thing for sure is that it doesn't slip
bushmechanic is offline  
June 21st, 2017, 10:56 AM   #7
Junior Member
 
Joined: Feb 2010
From: Portugal

Posts: 8
Thanks: 1

I Ride:
Tomorrow will be welded.

By the way, does anyone knows the thickness of the gasket (new) of the clutch cover in mm?


There is no any in stock in Portugal so i have to make one with gasket paper. I have a paper sample of 0,40mm but i think is too thin for the job.

thanks
Merlow is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
fe650, limiter, measures, torque



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
torque limiter sparks Mechanical 35 November 5th, 2014 02:04 PM
Torque Limiter gwp58 Mechanical 7 October 27th, 2010 07:01 PM
Torque Limiter Badvoc Mechanical 3 March 6th, 2010 06:57 PM
Torque limiter shimming and testing Skibum Mechanical 3 April 22nd, 2009 05:50 PM
Torque limiter sparks Husaberg 0 December 15th, 2007 11:32 AM


Facebook Twitter Google+ RSS Feed