Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
June 9th, 2017, 04:15 PM   #1
Senior Member
 
Alan's Avatar
 
Joined: Jul 2016
From: Australia, Beechworth, Vic.

Posts: 321
Thanks: 148

I Ride: when I can which isn't often enough. FX450, FE570
FX/FC 450 camshaft

G'day all,

I have a FX450 '10 that I'm using for motard around local tracks.

I have been running the Vortex ECU, straight through muffler and cut back the seat to derestrict the air filter.

This has really livened up the 450, but, a mates stock FC450 Husky (around '13) has the edge on it.

For starters they run the 44mm throttle body but the camshaft has a different part number. ECU doesn't matter as I'm running the Vortex.

The FX camshaft part number comes up as 78136010033.

The FC camshaft come up as 78936010133.

Any ideas on the difference between the two ie profiles and will the Husky/KTM camshaft fit the FX?

Anything else I can do to liven the girl up?

Thanks Guys.

Al.
Alan is offline  
 
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
450, camshaft, fx or fc



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
only camshaft fe 450 04 Mario Mechanical 3 November 9th, 2014 02:17 PM
'07 FS 650 E Camshaft nitzi Mechanical 4 November 25th, 2010 04:41 AM
LRX2 Camshaft gotlund Mechanical 5 March 4th, 2010 02:17 AM
Camshaft Lobes up or Down at TDC ADryden23 Mechanical 4 June 27th, 2009 02:24 PM
GW G3 Camshaft - Revs out like a 450 ! Supermoto_Husaberg Mechanical 10 May 25th, 2004 12:37 AM


Facebook Twitter Google+ RSS Feed