Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Thanks Tree1Thanks
  • 1 Post By Rainerio
Reply
 
LinkBack Thread Tools Display Modes
April 20th, 2017, 01:58 PM   #1
Junior Member
 
Joined: Mar 2016
From: italy

Posts: 14
Thanks: 0

I Ride: husaberg 390, bmw gs 1150 adv, cagiva extraraptor 1000, gilera rc 600 parigi dakar replica
fe 390 2010 skid plate alu

HI, any one could help me to instal the alu factory skid plate on my 2010 390?
I've find two little holes on the bottom frame, just on line with the 2 holes on the plate, but closed by a pair of plastic cover. Trying to mount the alu skid plate, after have been removed the original plastic one, I've seen that the holes haven't got the screw tread, and that the screws arrived with the skid plate are smaller than the holes.
any idea or suggest to install the item?
thanks
walter
walter27 is offline  
 
April 20th, 2017, 03:45 PM   #2
Senior Member
 
Rainerio's Avatar
 
Joined: Jun 2013
From: San Francisco CA. USA

Posts: 765
Thanks: 162

I Ride: 7 Husabergs two FE570S,FS570 FE390/450,07 FE650,05 FE550,2 Husqvarna's 86 WR400,87 510,09 Buell
There are tapped. Just a tap thru the holes and you fine. Screw size is the same as the front bolt.
Thanks from jon andersson
Rainerio is offline  
April 20th, 2017, 10:38 PM   #3
Junior Member
 
Joined: Mar 2016
From: italy

Posts: 14
Thanks: 0

I Ride: husaberg 390, bmw gs 1150 adv, cagiva extraraptor 1000, gilera rc 600 parigi dakar replica
thanks for the unswer.. I'll try to remove the plastic that has remained inside the holes... the top of the tap has been just removed...
walter27 is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
2010, 390, alu, plate, skid



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
650 skid plate? Tamas Tech 7 February 16th, 2013 11:15 PM
E-Line Skid Plate fljar Tech 8 May 1st, 2012 07:58 AM
Skid Plate question - 08 FE 450 matikrimerman Husaberg 5 February 14th, 2009 12:23 PM
Skid Plate GEE-BEE Tech 2 July 21st, 2006 12:41 PM
'99 FE 400 skid plate? BonChance13 Husaberg 4 May 6th, 2004 02:28 PM


Facebook Twitter Google+ RSS Feed