Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
April 2nd, 2017, 02:20 PM   #1
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,032
Thanks: 326

I Ride:
early 350 and 400 con rods

we have ordered just 10 con rods for the 1990-1995 350 and the 1996-2000 400. they are due at the end of next month-May.

we have taken two pre-orders so 8 left.

when i get these in it will mean that all tthree early engines are covered again for the first time since the factory stopped making them about 8 years ago.

I expect them to be 200 quid inside the EU and about 166 outside.

regards

Taffy
Taffy is offline  
 
April 3rd, 2017, 02:02 AM   #2
Senior Member
 
Joined: Jan 2008
From: South Western Ontario

Posts: 143
Thanks: 17

I Ride:
Taffy I will take a 350 rod for a 94 FE I will send you a email, later today.

fedge
fedge is offline  
April 4th, 2017, 11:59 AM   #3
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,032
Thanks: 326

I Ride:
nice one Fedge!
can I ask you to email your details into the office and Julia will keep you posted.

Taffy
Taffy is offline  
April 6th, 2017, 01:28 AM   #4
Senior Member
 
Joined: Jan 2008
From: South Western Ontario

Posts: 143
Thanks: 17

I Ride:
Hey Taffy,I have sent the email to your office, and Julia replied, I will put together a list for a complete engine over hull, I seen Valve guides and seals, are there valves and springs for this bike as well.

Thanks,fedge
fedge is offline  
April 6th, 2017, 04:50 AM   #5
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,032
Thanks: 326

I Ride:
yes we have stopped selling OEM guides now because they are too loose. the rest is standard issue, all our valves are the same price which makes our gas-flowed inlets more expensive than OEM but the exhausts are cheaper.

regards

Taffy
Taffy is offline  
April 7th, 2017, 11:02 PM   #6
Junior Member
 
twsniklas's Avatar
 
Joined: Dec 2011
From: Sweden Írebro

Posts: 11
Thanks: 6

I Ride: Husqvarna&Husaberg
350/400 connecting rod shall be the same as early 501 fixed with 20mm little end?
twsniklas is offline  
April 7th, 2017, 11:51 PM   #7
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,032
Thanks: 326

I Ride:
no, the 501 rod is shorter.

here is the advert on ebay:
Husaberg Con Rod Kit CPL 501 Model 1994-2000 - Taffmeisters replaces 21005801 | eBay

this rod is more expensive because it is made in Europe.

regards

Taffy
Taffy is offline  
April 7th, 2017, 11:57 PM   #8
Junior Member
 
twsniklas's Avatar
 
Joined: Dec 2011
From: Sweden Írebro

Posts: 11
Thanks: 6

I Ride: Husqvarna&Husaberg
89-93 501 rod is long 121 cc?

94-00 is short, 119 cc
twsniklas is offline  
April 8th, 2017, 12:22 AM   #9
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,032
Thanks: 326

I Ride:
I don't know the length of the long stroke 501. do you have one? are you sure it is 121mm?

later it was 119mm or 120mm, yes.

Taffy
Taffy is offline  
April 8th, 2017, 01:38 AM   #10
Senior Member
 
Joined: Jan 2008
From: South Western Ontario

Posts: 143
Thanks: 17

I Ride:
When I get my connecting rod removed I will let you all know. How long the 94 FE350 is.

fedge.
fedge is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
350, 400, con, early, rods



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
con rods spanner Mechanical 5 January 5th, 2014 02:54 AM
600 con rods apply here! Taffy Mechanical 1 October 8th, 2012 03:05 PM
christmas is early! Taffy Husaberg 6 December 11th, 2008 05:07 PM
The Con-rods! Cypriot Mechanical 1 September 8th, 2006 09:51 AM
Radiator rods? BOSS Cooling Systems 14 April 1st, 2006 04:13 PM


Facebook Twitter Google+ RSS Feed