Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
February 10th, 2017, 06:31 AM   #1
Junior Member
 
Joined: Dec 2016
From: Columbus, Indiana

Posts: 3
Thanks: 0

I Ride: 1995 Husaberg FE501
95 501 camshaft with auto decomp?

I currently have a 1995 FE 501. Can I use a 1997 FE 501 camshaft with the auto decompression in the 1995 head?

If this is possible, should i disconnect the cable from the kickstarter and let the auto decompression on the cam do it's job?

All input is appreciated!
hdubyaw is offline  
 
February 10th, 2017, 01:31 PM   #2
Senior Member
 
husabutt's Avatar
 
Joined: Feb 2003
From: Escondido, Ca. USA

Posts: 3,110
Thanks: 334

I Ride: 2005 Fe450,2001 Fx470,1997 Fx600
I believe it will. You could disconnect the kickstart activated decomp but leaving it in place won't hurt anything.

I would use the 04-08 ADD (auto decompression device) as it is the best one
A new properly wound ADD spring or Taffmeisters modified spring

I am sure Taffy will come along here any moment and give us the final word on this.

Consider new while you are in there:
KTM cam
04-08 cam sprocket
Cam bearings
Timing chain
Cam follower bearings
Water pump seal
Updated water pump impeller
husabutt is offline  
February 11th, 2017, 03:12 PM   #3
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,067
Thanks: 503

I Ride: Husaberg FE501e 2003
all that Eric says really... I turn the cam cover over, lay the cam in it and make sure that 100% of the CFB is pushing the rocker arm. then Like Eric, I make sure the camchain aligns with lower down and that is about it really..

I can get brand new factory cams for the pre 1997s BTW

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
501, auto, camshaft, decomp



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
auto decomp schultzy Mechanical 5 March 15th, 2009 09:04 AM
No Auto-Decomp? RossMcNish Mechanical 8 March 16th, 2008 07:39 AM
That auto-decomp chestnut Ady Mechanical 6 November 3rd, 2007 11:52 AM
FE 501e auto decomp ?? BITE-ME Mechanical 4 August 13th, 2007 01:40 AM
Broken Auto Decomp Bob Weight on Camshaft r7css Mechanical 20 February 10th, 2005 11:32 PM


Facebook Twitter Google+ RSS Feed