Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs

LinkBack Thread Tools Display Modes
January 15th, 2017, 02:14 PM   #1
Junior Member
Joined: Dec 2007
From: A dark dark place

Posts: 26
Thanks: 0

I Ride:
Fs650 cracked crank casing inside ignition cover.

Looking to shine any light on this issue, any one suffered similar? I imagine the issue could either be caused by bearing failure or crank spread? What's my chances of repairs?
bergiefe400 is offline  
January 15th, 2017, 02:40 PM   #2
Senior Member
Damo W's Avatar
Joined: Aug 2016
From: NSW Australia

Posts: 166
Thanks: 85

I Ride: 2003 FE650 2005 FS650C

Should be repairable. Just make sure you drill a small hole at the end of the crack first (where the crack is still developing) before its welded otherwise it will likely crack again. A reputable welder should be able to sort it.

Damo W is offline  

  Husaberg Forum > Mechanical and Technical > Mechanical

casing, cover, cracked, crank, fs650, ignition, inside

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
ignition cover ami sha Electrical 0 November 4th, 2016 11:35 AM
Valve cover with hole inside. hacker33 Mechanical 17 July 7th, 2015 02:48 AM
billet ignition cover Haskell Mechanical 1 April 6th, 2011 07:29 AM
Bust Crank '04 fs650 SquirrelyScott Mechanical 2 July 22nd, 2008 02:46 AM
BILLET IGNITION COVER SLOWJOE Electrical 5 October 8th, 2005 07:29 AM

Facebook Twitter Google+ RSS Feed