Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs

LinkBack Thread Tools Display Modes
August 7th, 2016, 01:04 AM   #1
Junior Member
Joined: Jul 2015
From: Nottingham

Posts: 1
Thanks: 0

I Ride:
650 crank case split

Looks like I have a leak from the crankcase on my 650 and might have to split the cases.

As I only need to pull the cases apart and re seal the joint hopefully can I just strip the right side take the head off and then pull the cases apart. It looks like all the shafts etc stay in the left side anyway, does this sound OK?
Paul Collin is offline  
August 7th, 2016, 04:30 AM   #2
Senior Member
bushmechanic's Avatar
Joined: Jun 2007
From: south east WA Australia

Posts: 3,870
Thanks: 1220

I Ride: 2008 700FK, 2002 628FST
Yes it works to leave almost everything In the lhs

For a case centre join leak though there are
Easier ways to fix them

Bike upside down degrease the area and use sikaflex 221 or threebond 1207b from
The outside

Last edited by bushmechanic; August 7th, 2016 at 03:29 PM.
bushmechanic is offline  
August 13th, 2016, 09:24 AM   #3
Senior Member
Joined: Jun 2016
From: California USA

Posts: 100
Thanks: 31

I Ride: 2005 husaberg fe650e and 2007 BMW k1200gt
650 crank case split


Last edited by Md4stone; August 13th, 2016 at 09:26 AM. Reason: Post to wrong thread
Md4stone is offline  

  Husaberg Forum > Mechanical and Technical > Mechanical

650, case, crank, split

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Stripped Crank Case Thread Bergboii22 Mechanical 2 July 29th, 2015 01:09 PM
fuel in crank case 03berg Fuel 4 May 30th, 2013 06:22 AM
Crank case breather options. mud400 Mechanical 1 December 14th, 2010 12:21 PM
Crank Case Venting Rideguy Husaberg 12 December 3rd, 2004 02:19 PM
Crank case breather Bigdan Mechanical 13 May 4th, 2004 06:33 PM

Facebook Twitter Google+ RSS Feed