Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Thanks Tree1Thanks
  • 1 Post By Emiiilz
Reply
 
LinkBack Thread Tools Display Modes
July 31st, 2016, 08:55 AM   #1
Junior Member
 
Joined: Jul 2016
From: Sweden

Posts: 4
Thanks: 1

I Ride:
Question 650 FS, eat oil - little valve noise and hard to start.

Husaberg 650fs 2002. I buy it for 2 week ago.

The engine eats oil, after riding around 1 hour and it has takes around 2-3dl of oil. Not smoking, and no leaking? Dont se oil in the engine glass when the bike is off and straight.

I have adjust the valves to, with 1/6, but i think i have little valve noise, or maby these engine just sound like that?

And i have hard to start the bike to, i think its because the ignition system, my flywheel dont look very nice, normal problem? I dont always get ignition at the sparkplug when i turn the engine over, but when i got it looks nice, but with my ignition tester it will not fix 5-7mm, more like 3-4mm..

When the bike is running its run very nice!
Emiiilz
Thanks from Wallden
Emiiilz is offline  
 
July 31st, 2016, 12:19 PM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,035
Thanks: 327

I Ride:
200-300dl? what is 300dl? is that 300ml? same as 300cc?

realistically, the onloy way you can lose that oil is to misunderstand what is happening or that the pistonm is badly worn and you cannot see the oil in the exhaust gases!

regards

Taffy
Taffy is offline  
July 31st, 2016, 01:14 PM   #3
Junior Member
 
Joined: Jul 2016
From: Sweden

Posts: 4
Thanks: 1

I Ride:
200-300ml of oil i mean!
Emiiilz is offline  
August 4th, 2016, 02:19 PM   #4
Senior Member
 
Joined: Nov 2010
From: montreal,Canada

Posts: 234
Thanks: 17

I Ride: 2005 fs650
either your rings are shot, or your getting tons of oil through your engine breather. remove the air filter and see how much oil is sitting in the frame.

My 2005 650 was the same thing and it ended up being a warped cylinder and oil going through the engine breather.
helithumper is offline  
August 6th, 2016, 12:50 AM   #5
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,035
Thanks: 327

I Ride:
all those 2002s are worn right out inside. a rebuild is easily 1,000. it's a job to know where to stop with them. you need to be a very good mechanic with them.

if you ever to take it to a shop - get it here to me in the UK.

regards

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
650, eat, hard, noise, oil, start, valve



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bike Died No Kick Start Only Bump Start[Broken Valve Spring] TCK! Mechanical 26 May 17th, 2007 10:57 AM
hard cold start sometimes hard hot start deadeyedick Fuel 5 August 27th, 2006 05:02 PM
Strange noise on hard launch CheGuevara Mechanical 8 February 16th, 2006 12:16 PM
Hard/No Start fish Mechanical 10 July 19th, 2005 07:53 AM
FC 501 Valve noise thefreeryder Mechanical 6 March 20th, 2005 07:50 AM


Facebook Twitter Google+ RSS Feed