Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
July 14th, 2016, 06:02 AM   #1
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,782
Thanks: 462

I Ride: Husaberg FE501e 2003
2001-2004 82mm stroke cranks required (644cc)

if anyone has a 2001-2004 82mm crank from their 644 they want to sell then please let me know OK?

can't do much with smashed woodruff key slots or wonky spindles but worn big ends or spindles are perfect!

thanks

Taffy
Taffy is offline  
 
November 2nd, 2016, 04:30 PM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,782
Thanks: 462

I Ride: Husaberg FE501e 2003
This is a good time to bump this thread as I'm now nearer to completrition of the 700 first engine.

Taffy
Taffy is offline  
November 2nd, 2016, 04:44 PM   #3
Senior Member
 
Damo W's Avatar
 
Joined: Aug 2016
From: NSW Australia

Posts: 166
Thanks: 85

I Ride: 2003 FE650 2005 FS650C
Good good. I'll be interested to see your creation. Looking forward to it as I have a 82mm crank motor to be built.

Damo
Damo W is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
644cc, 82mm, cranks, required, stroke



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
2004+ 30mm exhaust valve in a 2001 FX650 madsledhead Mechanical 7 July 1st, 2014 12:14 AM
Long stroke vs short stroke 650 ID Vegard Mechanical 10 May 10th, 2014 03:16 AM
Non OEM rod kit for the 644cc? Dr_C Mechanical 43 May 2nd, 2014 01:55 AM
Want To Buy: Look for a 650 frame 2001-2004 Lukechaz Want To Buy 2 April 3rd, 2014 07:59 AM
400 and 470 cranks are different - slightly! Taffy Mechanical 0 November 7th, 2008 10:13 AM


Facebook Twitter Google+ RSS Feed