Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
July 3rd, 2016, 11:46 PM   #1
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,035
Thanks: 327

I Ride:
'04 -'08 valve guides plus some '90s etc

I don't know what the hell is going on but the valve guides for the 2004-2008s are way too loose all of a sudden! this is both inlets and exhausts. basically when and after being fitted, the valves wobble by 2mm which is why I changed the friggin guides anyway!

we also have a 1996 here as well. it has 12mm OD guides like the 2004-8s and thus falls into the same trap!

I'm looking into this today but anyone got an email address suitable at KTM so that I can burn their ear?

for those of you too cheap to ever have checked them let alone think about changing them: could you please continue in the same old way. thank you!

regards

Taffy
Taffy is offline  
 
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
90s, guides, valve



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
valve guides for up to 2004 Taffy Mechanical 1 November 16th, 2015 09:33 AM
Valve Guides differences 2004-2008 birdwoodburg Mechanical 0 March 8th, 2013 02:59 PM
worn valve guides spanner Mechanical 7 June 30th, 2008 05:33 PM
New valve guides + valve size BelgiqueBasterd Mechanical 7 April 7th, 2007 12:30 AM
valve guides oyk Mechanical 11 May 21st, 2005 12:26 PM


Facebook Twitter Google+ RSS Feed