Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
July 2nd, 2016, 03:10 PM   #1
Senior Member
 
Joined: May 2016
From: Portugal

Posts: 119
Thanks: 24

I Ride: Husaber FE 400 E 1998, Suzuki DR 350 SE 1998, XT 350 1992
O-Rings

Hello all
I've got a 1997 Husaberg FE400 E
It started leaking coolant from the weep hole
Where can i find the correct o-rings for the repair ?
Are there any cross-reference to another make/model ?

Also the o-ring in the e-starter needs replacement


thanks

Nuno
webmonstro is offline  
 
July 3rd, 2016, 02:00 AM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,378
Thanks: 394

I Ride: Husaberg FE501e 2003
14,000th post!

Hello Nuno
if you are leaking coolant at the cam, you need two new waterpump seals. you don't need ANY 'O' rings at all. it is very likely that your cam has two grooves in it now because it is so old. if this is so, you should consider a new cam from a KTM?

which O ring at the starter are you looking for? give me the number from the parts book: page and number of the part OK?

regards

Taffy
Taffy is offline  
July 3rd, 2016, 02:33 PM   #3
Senior Member
 
Joined: May 2016
From: Portugal

Posts: 119
Thanks: 24

I Ride: Husaber FE 400 E 1998, Suzuki DR 350 SE 1998, XT 350 1992
Hello , thanks for your reply

I see now that i need part nš 340 029-01 (two) and Part nš 350 000-01 (also two )

nš 37 and nš 38 in this image:

[IMG=100x100]http://i63.tinypic.com/ogbcz4.png[/IMG]


for the starter i need part nš 350 024-01

nš 35 in this image :




as it's leaking from that area


Do you have them in your online shop?

I'l be needing both air filters also can you combine shipping ?


thank you

nuno

Last edited by webmonstro; July 3rd, 2016 at 02:35 PM.
webmonstro is offline  
July 3rd, 2016, 11:55 PM   #4
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,378
Thanks: 394

I Ride: Husaberg FE501e 2003
the O ring is easy enough....
the two O rings are easy.....
the two seals are easy!

so all in all - easy!
10.82 plus 2.18 post = 13gbp.
respond to david@taffmeisters.co.uk

regards

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
orings



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cam o-rings on FS600 kneedown Mechanical 1 April 19th, 2011 07:44 AM
Piston rings 501 Scouser Husaberg 3 September 28th, 2007 11:02 AM
Stuck Rings ned37 Mechanical 1 May 4th, 2006 09:15 PM
Piston rings doctorcorey Mechanical 4 March 27th, 2006 10:02 AM
O-rings mikst Mechanical 3 October 27th, 2004 10:39 AM


Facebook Twitter Google+ RSS Feed