Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
May 18th, 2016, 01:40 AM   #1
Junior Member
 
Joined: Jan 2016
From: Poland

Posts: 2
Thanks: 0

I Ride:
fe 501 2000 cam lobes dim

Hi,

anyone can help me, what cam lobes sizes should be in my 2000 fe501. I have a problem. When i put TDC, set valve clearance (0,1), and turn cam, the clearance grow to ~2,5mm (on all valves). Do not see any significant damages on camshaft or arms. Any ideas?

My lobes 33,4mm x 25,8mm

http://s32.postimg.org/y32lb6iv9/IMG_0694.jpg

Last edited by noggero; May 18th, 2016 at 05:21 AM.
noggero is offline  
 
May 18th, 2016, 09:09 AM   #2
Moderator
 
ned37's Avatar
 
Joined: Dec 2004
From: back in cottonwood, az

Posts: 2,313
Thanks: 195

I Ride: '08 HUSKY te610
make sure you adjust at tdc AFTER the intakes close, or the exhaust clearances will be too big.
ned37 is offline  
May 18th, 2016, 01:05 PM   #3
Junior Member
 
Joined: Jan 2016
From: Poland

Posts: 2
Thanks: 0

I Ride:
You`re right! That was the problem Big thx
noggero is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
2000, 501, cam, dim, lobes



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
2000 fc 501 SledNeck Husaberg 3 February 9th, 2016 05:22 AM
lobes up? yanesberg Mechanical 7 June 27th, 2013 01:30 AM
Camshaft Lobes up or Down at TDC ADryden23 Mechanical 4 June 27th, 2009 02:24 PM
2000 fc 501 husqydave Suspension 4 February 17th, 2009 01:57 PM
pre 2000 501 neiljv01 Mechanical 4 April 25th, 2007 08:42 AM


Facebook Twitter Google+ RSS Feed