Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
October 28th, 2015, 03:42 AM   #1
Junior Member
 
Joined: Aug 2015
From: South West, UK

Posts: 17
Thanks: 0

I Ride: 1992 Husaberg FE 350
1996 FE350 valve clearances

Hi,
I'm trying to find out what my valve clearances should be set at. I've got the pre 2000 manual from the manuals section but I'm not sure if its relevant to all pre 2000 as it says "1999 and pre 2000".

Would all pre 2000 Berg's have the same clearances?

Can anyone tell me what my clearances should be if not 0.10mm

Thank you
Joe
joef is offline  
 
October 28th, 2015, 03:45 AM   #2
Senior Member
 
Joined: Nov 2007
From: Sweden Olofstrom

Posts: 392
Thanks: 19

I Ride: Husaberg FE 400 00, Husaberg Fe450 07, Husaberg FC 600 -99, Yamaha FJ1200 -86 Yamaha RD350 -84
Same for all Husabergs to -08.
Regards
Jampe
Originally Posted by joef View Post
Hi,
I'm trying to find out what my valve clearances should be set at. I've got the pre 2000 manual from the manuals section but I'm not sure if its relevant to all pre 2000 as it says "1999 and pre 2000".

Would all pre 2000 Berg's have the same clearances?

Can anyone tell me what my clearances should be if not 0.10mm

Thank you
Joe
jampe is offline  
October 28th, 2015, 03:52 AM   #3
Junior Member
 
Joined: Aug 2015
From: South West, UK

Posts: 17
Thanks: 0

I Ride: 1992 Husaberg FE 350
Thanks for the quick reply!

So all Husaberg's up to 2008 are 0.10mm clearance on exhaust and intake?

Thanks
joef is offline  
October 28th, 2015, 04:23 AM   #4
Senior Member
 
bushmechanic's Avatar
 
Joined: Jun 2007
From: south east WA Australia

Posts: 3,860
Thanks: 1196

I Ride: 2008 700FK, 2002 628FST
they work at that but

5.5 thou works for me
bushmechanic is offline  
October 28th, 2015, 07:22 AM   #5
Junior Member
 
Joined: Aug 2015
From: South West, UK

Posts: 17
Thanks: 0

I Ride: 1992 Husaberg FE 350
Great, thanks.
joef is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
1996, clearances, fe350, valve



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Valve Clearances Wiggy Mechanical 7 October 16th, 2018 06:51 PM
1996 FE350 Jetting help cft Fuel 17 April 11th, 2018 06:51 AM
1996 fe350 stator didibuyapartsbike Husaberg 10 March 15th, 2012 07:20 AM
1996 fe350 questions uranys Mechanical 5 April 6th, 2011 06:21 AM
Valve Clearances? space Mechanical 1 May 18th, 2007 01:52 PM


Facebook Twitter Google+ RSS Feed