Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
September 20th, 2015, 07:34 PM   #1
Junior Member
 
Joined: Sep 2015
From: Melbourne

Posts: 3
Thanks: 0

I Ride:
2002 FE400 cam chain tensioner location

I was hoping someone would be able to help me out with the measurement for where the tensioner sit in the head. Following the explosion of the top end I've finally got it welded up but lost the location of the bolt for the tensioner for a 2002 fe400 head. If someone could help me out with this it would help a lot keen to get it back on the trails
dmacbergrider is offline  
 
September 21st, 2015, 03:47 AM   #2
Senior Member
 
bushmechanic's Avatar
 
Joined: Jun 2007
From: south east WA Australia

Posts: 3,772
Thanks: 1065

I Ride: 2008 700FK, 2002 628FST
if you get a newer cam chain tensioner blade the location needs to be moved from the old location

if thats what you want to do (upgrade to newer part) i can get you the measurements required for the newer tensioner ?
bushmechanic is offline  
September 21st, 2015, 02:32 PM   #3
Junior Member
 
Joined: Sep 2015
From: Melbourne

Posts: 3
Thanks: 0

I Ride:
I bought taffmeisters modified tensioner blade think that goes in the standard location? Any help would be appreciated
dmacbergrider is offline  
September 22nd, 2015, 12:31 AM   #4
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,100
Thanks: 337

I Ride:
if you measure 11.5mm down from the head to rocker cover it is 11.5mm and if you measure across from the camshaft housing abutment which is micely vertical for you: it is 25.0mm dead.

all casting differences aside, this should do you and yes, with the modified tensioner blade it'll put up with a millimetre in every direction I reckon!

regards

Taffy
Taffy is offline  
September 22nd, 2015, 04:03 AM   #5
Junior Member
 
Joined: Sep 2015
From: Melbourne

Posts: 3
Thanks: 0

I Ride:
Thanks taffy got the 11.5 are you measuring the 25 from the bump from the cam on the outside (abutment) ie the attached pic
Attached Thumbnails
2002 FE400 cam chain tensioner location-imag0258.jpg  
dmacbergrider is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
2002, cam, chain, fe400, location, tensioner



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cam chain tensioner fully out with new chain Finnmats Mechanical 11 May 9th, 2014 01:48 PM
09 cam chain tensioner ironknobby Mechanical 6 October 29th, 2009 02:25 PM
cam chain tensioner denke Mechanical 11 August 13th, 2007 10:43 AM
2002 timing chain and tensioner upgrade. BelgiqueBasterd Mechanical 1 November 12th, 2006 08:21 AM
2002 FE501 header pipes on 2002 FE400 anyone? faktor Mechanical 3 July 21st, 2005 04:51 PM


Facebook Twitter Google+ RSS Feed