Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs

LinkBack Thread Tools Display Modes
April 24th, 2015, 11:50 PM   #1
Senior Member
worstinfinland's Avatar
Joined: Sep 2014
From: finland

Posts: 113
Thanks: 61

I Ride: Fe650 -04
650 -04 cam chain guide

Got my engine in to one piece for a long time. Still waiting for my yellow as f**k frame and brp special black swingarm.

So I had nothing to do and decided to check everything possible on the engine, valve clearances etc.

Timing chain tensioner had only 4 clicks left. Timing chain was replaced a bit over 10 hours ago, but according to the maintenance book I got from the previous owner the cam chain hadn't been changed in at least 80 hours, they did look a bit beat up too.

After looking up the price of the guides I got mad at myself for not replacing them when I got the engine stripped.

Can I replace them without splitting the camchain?
worstinfinland is offline  
April 25th, 2015, 04:54 PM   #2
Joined: Nov 2014
From: Australia

Posts: 75
Thanks: 35

I Ride:
Cam chain needs to be split, one of the water lines runs between the chain on the cylinder head so to get it in/out you need to break it unfortunately!
LemoneyF is offline  
April 25th, 2015, 05:04 PM   #3
Senior Member
Joined: Sep 2007
From: ???

Posts: 782
Thanks: 291

I Ride:
Even with a new chain mine ran a fair way out on the adjuster.
spanner is offline  

  Husaberg Forum > Mechanical and Technical > Mechanical

650, cam, chain, guide

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
swingarm chain guide? WeezerG Mechanical 1 January 18th, 2015 12:33 PM
Lc4 chain guide on a 501e horsinaround Mechanical 6 January 3rd, 2014 11:54 AM
Rear Chain Guide squizz Wheels and Tires 1 May 21st, 2008 04:36 AM
ByeBye Chain Guide bigbob Husaberg 5 May 12th, 2008 11:05 AM
chain guide /block mberg501 Husaberg 5 March 22nd, 2007 01:04 PM

Facebook Twitter Google+ RSS Feed