Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
April 6th, 2015, 02:18 PM   #1
Member
 
Joined: Sep 2011
From: Oxford, UK

Posts: 51
Thanks: 12

I Ride: FE 390, 690 Enduro R, K75RT
FE390 - valve clearances

Just checked the valves on my 390 today. To my shame I realised I'd not checked them for about 160 hours. To the bikes credit, they were all still in spec with both inlets at 0.12mm and both exhausts at 0.15mm. Bike's now on 304 hours and 7807 miles.

Whilst looking for the valve clearances online, I came across a thread that mentioned timing marks? I'd already found TDC by sticking a straw down the plug hole after the inlet valve had closed and rotating the rear wheel whilst letting the piston push the straw upwards through my fingers but I still can't see the timing marks referred to online - anyone able to point me in the right direction, preferably with a photo?

Thanks

Steve
Possu is offline  
 
April 6th, 2015, 02:39 PM   #2
Senior Member
 
Joined: Oct 2012
From: Belgium brugge

Posts: 716
Thanks: 167

I Ride: bikes
There is a little dot on the camwheel.
That has to line up wit a dot on top of the part where the cam slides in.
HusaBELGfs570 is offline  
April 6th, 2015, 02:57 PM   #3
Member
 
Joined: Sep 2011
From: Oxford, UK

Posts: 51
Thanks: 12

I Ride: FE 390, 690 Enduro R, K75RT
Thanks, found a pic in another thread.
Possu is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
clearances, fe390, valve



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Valve Clearances Wiggy Mechanical 5 April 28th, 2017 02:35 PM
Fs650e adjusting valve clearances Lumpy Cam Mechanical 3 February 1st, 2013 07:03 PM
Valve Clearances? space Mechanical 1 May 18th, 2007 02:52 PM
06Fe450e valve clearances? bigbob Mechanical 15 December 6th, 2005 03:09 AM
Tight Valve Clearances Scoobie Mechanical 10 June 9th, 2005 02:25 PM


Facebook Twitter Google+ RSS Feed