Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
January 15th, 2015, 10:16 PM   #1
Member
 
sico's Avatar
 
Joined: May 2014
From: australia

Posts: 91
Thanks: 20

I Ride: '12 FE390
70 degree air intake

My 95hr 390 seems to get a build in the throttle body.. Anyone else's do similar?
sico is offline  
 
January 16th, 2015, 12:08 AM   #2
Senior Member
 
Joined: Oct 2012
From: Belgium brugge

Posts: 716
Thanks: 168

I Ride: bikes
Do you clean out the oil inside the airbox on regular basis?
I do every oil change...
No build up on my TB
HusaBELGfs570 is offline  
January 16th, 2015, 02:10 AM   #3
Member
 
sico's Avatar
 
Joined: May 2014
From: australia

Posts: 91
Thanks: 20

I Ride: '12 FE390
Originally Posted by HusaBELGfs570 View Post
Do you clean out the oil inside the airbox on regular basis?
I do every oil change...
No build up on my TB
Hmm.. Airbox is always relatively clean. When I change air filter I wipe the sealing surface of air filter oil residue.
sico is offline  
January 16th, 2015, 02:55 AM   #4
Senior Member
 
Joined: Oct 2012
From: Belgium brugge

Posts: 716
Thanks: 168

I Ride: bikes
In my airbox there is always a little bit of engine oil that the engine spits out of the breather hose and I do'nt over fille the bike with oil....
Maybe wheely's or revving the hell out of it makes it spit out some oil
HusaBELGfs570 is offline  
January 16th, 2015, 07:58 AM   #5
Senior Member
 
Joined: May 2011
From: Washington

Posts: 165
Thanks: 23

I Ride: FS663
Little silver thing on the lower right of you picture is where the engine breather is coming in - gives out just a little bit of oil residue from the motor. More full you run your oil the more likely it will have a some residue. Would also come out as the moisture in the oil as it vaporizes when the bike is hot.

my .02
Torque Monster is offline  
January 16th, 2015, 07:35 PM   #6
Member
 
sico's Avatar
 
Joined: May 2014
From: australia

Posts: 91
Thanks: 20

I Ride: '12 FE390
Thanks for the replies guys.
sico is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
air, degree, intake



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
intake noise Bigivyi Husaberg 10 November 15th, 2010 05:40 PM
1/6 intake 1/5 exhaust pollo Mechanical 2 July 28th, 2008 03:42 PM
intake boot 650 spanner Mechanical 1 June 30th, 2008 11:44 PM
Direct Intake pastullo Mechanical 1 January 29th, 2008 11:48 AM
Air intake cover BendBerg Tech 14 April 5th, 2006 05:50 PM


Facebook Twitter Google+ RSS Feed