Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Thanks Tree1Thanks
  • 1 Post By jon andersson
Reply
 
LinkBack Thread Tools Display Modes
December 13th, 2014, 11:27 AM   #1
Member
 
Joined: Jul 2011
From: nowhere near here

Posts: 40
Thanks: 0

I Ride: husaallthetime
09 FE450 ongoing hard hot starting pbms

I'm still trying to solve the hard ( or no ) hot starting issues on this bike.

When fully warmed up, if I restart the bike within 60 secs, it starts fine. If I wait longer, it won't start and, after a few tries, will barely turn over. If I wait another 30 minutes till it cools down, it starts just fine, cranks quickly.

If I open the throttle while cranking, the starter bogs down, as if the decomp is not working. But that makes no sense. The decomp is a mechanical centrifugal device that has no connection with the starter or the throttle.

So I continue to be puzzled with this bike's behavior.

Anyone have similar issues and have solved them?
bikemechanic53 is offline  
 
January 2nd, 2015, 10:54 AM   #2
Member
 
Joined: Jul 2011
From: nowhere near here

Posts: 40
Thanks: 0

I Ride: husaallthetime
Hmmm. Looks like no one has ever had these issues.

However, I decided to check the valves, despite having done them about 100 hours ago ( 500 total on bike). The exhausts were OK. But the intakes were .25mm and .30mm (spec is .10 to .15).

Turns out the shims had worn into cups. Replaced them with good shims. Now the bike starts much better when hot. Still not great, but better.
bikemechanic53 is offline  
January 2nd, 2015, 11:07 AM   #3
Senior Member
 
tourist's Avatar
 
Joined: Nov 2012
From: Iceland

Posts: 2,361
Thanks: 793

I Ride: 1 Berg, 1 Zook
Sorry, I missed this post first time 'round!

There have been some issues with hard starting and iirc there was an updated camshaft with a modified decompressor ... Have mostly seen that related to the 570s but it may apply to the 450 as well.

There may be some hints here: Hot start problem with Rekluse fitted 09 FE570 ... and yeah, there's information scattered around the site, try a Google search including "site:husaberg.org", like so: https://www.google.com/search?q=570+...3Ahusaberg.org
tourist is offline  
January 2nd, 2015, 10:47 PM   #4
Senior Member
 
Joined: Nov 2011
From: Nordic countries

Posts: 1,073
Thanks: 500

I Ride: 3x FE570
That 30 min cool down I had on my bike due to the small 10micron inline filter But you have a 09, unless you retro fitted one? But it doesnt sound like the same issue as you can restart within 60 sec, and I guess the engine is running good? And that turn over problem. Strange indeed.

What if a sensor is faulty or will an unadjusted TPS do anything? I'm thinking if the ignition timing/fuel will be wrong due to wrong ECU input? What happens if you remove the airfilter to give the sensor some cold air?

Honestly I have no clue whatsoever, just thinking out aloud as it is a strange behavior.

I agree with you that the auto decomp, which is mechanical, shouldnt be affected by temp. The only other thing I can think of bogging the start is wrong timing and fuel.

One thing though that is good to check on a bike like this is the battery terminals. I had a loose cable on one of the terminals. Gave strange results... All electronics you know... And the 09 batteries had weak terminals that broke easily.

As you see, no clue But one must start somewhere. And I noticed when a person throw out bad ideas the more cunning people join in and correct with more valid ideas haha
Thanks from tourist
jon andersson is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
fe450, hard, hot, ongoing, pbms, starting



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
600 fe hard starting. thehusaberger Electrical 2 August 30th, 2014 08:04 AM
Hard Starting 570 JakeB Mechanical 20 February 11th, 2013 02:19 PM
Hard Starting brian011952 Electrical 2 February 21st, 2012 09:33 AM
Hard starting 07 FE450 2tone Fuel 4 July 17th, 2011 09:27 AM
HARD STARTING WHEN HOT !!! SHARFSCHUTZEN Mechanical 13 September 9th, 2004 10:25 AM


Facebook Twitter Google+ RSS Feed