Husaberg Forum

Husaberg Forum (http://husaberg.org/husaberg-forums.php)
-   Mechanical (http://husaberg.org/mechanical/)
-   -   The technical adventures of Dr_C (http://husaberg.org/mechanical/18816-technical-adventures-dr_c.html)

Taffy December 17th, 2014 01:08 AM

how's that clutch surviving Mats?

is that the original 2002 or a 2003?

you forgot one of the nordic advantages of two rads! brrrrrrrr! and a nice piece of cardboard!

regards

Taffy

Dr_C December 17th, 2014 08:52 PM

Cant really tell about the clutch, Taffy. I have never killed one... yet. Sometimes I put together an engine with the older version and sometimes with the newer.

I live in the very south of Sweden, so it is not so cold here. A month ago we had a new record regarding temperature difference from north to south of 40 degC.

Two radiators give almost the same cooling area as OEM, so sometimes I have to use a strip of tape across either one of them. But at the premiere it was overheated, so I need to reveal the primary cause of that.

Dr_C December 27th, 2014 01:35 AM

1 Attachment(s)
The cylinder head is back from machining. The holes for the lifters had some scratches, so I went from 31mm to 32mm. I had to surf the internet a couple of hours to find that lifters for a Mitsubishi Evo X would fit my needs! Hopefully they will not be rejected after the transplant... Also the valve seals are taking a beating from the collets (high max lift), so I had the guides shortened 3mm to keep clear.

spanner December 29th, 2014 02:25 AM

Hi Dr C what size valves in this DOHC head?

I suppose the valve angle is less than the 20 degree of the OEM head?

Are you expecting a start up soon?:):):)

Cheers spanner

Dr_C December 31st, 2014 01:03 AM

Quote:

Originally Posted by spanner (Post 156193)
Hi Dr C what size valves in this DOHC head?

I suppose the valve angle is less than the 20 degree of the OEM head?

Are you expecting a start up soon?:):):)

Cheers spanner

Inlets are 41mm and exhaust are 33mm. The total inclined angle is 21deg.

While waiting for new lifters I'm entertaining myself with knocking rust off the frame on my race bus... very fun, really...

Dr_C January 5th, 2015 06:29 AM

Suppliers with prompt and correct delivery have earned some free advertising! Supertech got my valve lifters on the road just a couple of hours after my payment and now they have turned up here, in workshop!

http://tapatalk.imageshack.com/v2/15...8d9d558950.jpg

spanner January 31st, 2015 02:19 AM

Any progress Dr C???

Dr_C February 17th, 2015 08:05 AM

Quote:

Originally Posted by spanner (Post 157293)
Any progress Dr C???

Not so much... I had to put some 70 hours into my "racing" bus (mobile home), but now the rust is gone (for now) and almost the whole frame have been epoxy coated.

However, I have ordered 2 sleeves from Westwood and having a discussion with JE on 2 new pistons. I'm also designing new holders for my brake calipers, as the old ones didn't place the pads well enough on the discs. And I have treated myself with a tricky multimeter https://moosh.im/ that communicate with my smartphone through Bluetooth and displaying values or graphs!

But part from that I have mostly been crawling around beneath my mobil home. Fun. Indeed.

plumbbob February 17th, 2015 08:47 AM

Is anyone else thinking DrC + Race Truck =

http://image.truckinweb.com/f/webonl...eightliner.jpg

72triple February 18th, 2015 06:31 AM

Dr. C is freaking awesome. I sat through his build vids on Youboob last night. You sir are a mad man with the skills to pay the bills. "...no iridium spark plugs in this shop ever again." Bwahahhahh! With as much trial and tribulation that are involved in one-off hand built machines your demeanor is very neutral. I on the other hand would have been smashing parts and pieces to bits with the closest 10lb. micrometer that I could lay my hands on. Love you, you your show. Your passion and commitment are infectious. Keep them coming.


All times are GMT -8. The time now is 05:21 PM.

Copyright © 2021 Husaberg Forum. All rights reserved.