Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Thanks Tree2Thanks
  • 1 Post By zaga
  • 1 Post By Taffy
Reply
 
LinkBack Thread Tools Display Modes
September 16th, 2014, 09:00 AM   #1
Junior Member
 
Joined: Aug 2014
From: livermore ca

Posts: 4
Thanks: 1

I Ride: 600fe
Question help! looking for a 2000 fe600 clutch

hey guys,
i was wondering if any one could point me in the right direction. im looking for a clutch kit (steels, fibers and springs) for a 2000 husaberg fe600e. i cant seam to find any, the 2004 and up comes up but nothing for my 2000. Im guessing the clutches aren't the same. can anyone point me in the right direction or maybe have a clutch they want to get rid of?
Anthony

Last edited by livemoto; September 16th, 2014 at 09:01 AM. Reason: spelling
livemoto is offline  
 
September 17th, 2014, 12:19 AM   #2
Senior Member
 
zaga's Avatar
 
Joined: Mar 2009
From: Portugal

Posts: 1,385
Thanks: 247

I Ride: KTM 300 XC
Hi

Exactly what parts are you interested ?

You can use newer parts in your bike, if you want to change everything you can even use the 2006 + clutch, that it's much better, you just have to measure things, and play with the push rod and some shims.

Taffy sells all the solutions and makes some kits, so you can contact him.


ZAGA
Thanks from livemoto
zaga is offline  
September 17th, 2014, 12:41 AM   #3
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,380
Thanks: 394

I Ride: Husaberg FE501e 2003
the inside diameter of the clutch basket mounting hole is different between the bush (up to and including 2001) and the double row of needle rollers.

yes, I do a clutch conversion for all pre 2002s (starting in I think 1989 but don't quote me?)

this one would need a new basket as well as the needle rollers (2). keep your frictions and pressure plate Anthony.

go to the web site and punch in 110104. we have a spare basket or two. they show some wear but what we do here is put two steels together at the start so that you wear the high points down and DON'T make the low points lower! the clutch gets better with time.

that's not to say they are bad, they aren't they are good but you do the job with intelligence right?

regards

Taffy
Thanks from livemoto
Taffy is offline  
September 18th, 2014, 03:54 PM   #4
Junior Member
 
Joined: Aug 2014
From: livermore ca

Posts: 4
Thanks: 1

I Ride: 600fe
Originally Posted by Taffy View Post
the inside diameter of the clutch basket mounting hole is different between the bush (up to and including 2001) and the double row of needle rollers.

yes, I do a clutch conversion for all pre 2002s (starting in I think 1989 but don't quote me?)

this one would need a new basket as well as the needle rollers (2). keep your frictions and pressure plate Anthony.

go to the web site and punch in 110104. we have a spare basket or two. they show some wear but what we do here is put two steels together at the start so that you wear the high points down and DON'T make the low points lower! the clutch gets better with time.

that's not to say they are bad, they aren't they are good but you do the job with intelligence right?

regards

Taffy
awesome and thank you guys for the help. I'm looking into the conversion kit. taffy can you ship to the US?
Anthony
livemoto is offline  
September 18th, 2014, 11:38 PM   #5
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,380
Thanks: 394

I Ride: Husaberg FE501e 2003
yes of course, couldn't survive without the yanks!

suggest you do business away from UHE fella so please email us via our web site. you'll need to remind alison of who you are and what you want from the start.

regards

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
2000, clutch, fe600



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Please HELP, I need parts for a 2000 FE600 harikay Mechanical 6 February 22nd, 2014 03:36 PM
otimal AFR on fe600 2000 for street lassetn Fuel 1 June 23rd, 2013 05:36 AM
2000 fe600 lukecole Mechanical 11 October 31st, 2009 04:31 PM
2000 FE600 Frame Color brucifer Tech 2 October 8th, 2009 05:04 PM
2000 fe600 vs 2002 fc470 tkavan01 Husaberg 31 July 31st, 2009 09:26 PM


Facebook Twitter Google+ RSS Feed