Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
August 25th, 2014, 02:58 PM   #11
Senior Member
 
bushmechanic's Avatar
 
Joined: Jun 2007
From: south east WA Australia

Posts: 3,857
Thanks: 1194

I Ride: 2008 700FK, 2002 628FST
my 2002 rocker arms (look like this)



also have 7.6mm CFB shafts
bushmechanic is offline  
 
August 25th, 2014, 08:56 PM   #12
kli
Senior Member
 
kli's Avatar
 
Joined: Feb 2011
From: Pazin, Croatia

Posts: 164
Thanks: 38

I Ride: FE501E 2003
Hi bushie,

Yes that is like mine.
Can you feel some small play between axle and rocker on yours?
My axle's are a bit damaged on places where rocker bushings are.
kli is offline  
August 25th, 2014, 09:17 PM   #13
Senior Member
 
bushmechanic's Avatar
 
Joined: Jun 2007
From: south east WA Australia

Posts: 3,857
Thanks: 1194

I Ride: 2008 700FK, 2002 628FST
yes slight play but in my case it is from the bronze bushings being worn

you can use the new rocker shafts if you drill appropriate holes for the oil and plug one end, diamond coated spherical burrs are the easiest way to drill hard metal at home. rocker shaft Pn# 59036057000

just turning yours upside down might be enough though.

Last edited by bushmechanic; August 27th, 2014 at 04:15 PM.
bushmechanic is offline  
October 4th, 2014, 04:32 AM   #14
kli
Senior Member
 
kli's Avatar
 
Joined: Feb 2011
From: Pazin, Croatia

Posts: 164
Thanks: 38

I Ride: FE501E 2003
Hi all,

Received the and fit the parts for rockers.
New 7,6mm bearing with pin and valve adjustment screws from newer Husaberg, bronze bushings from Taffy.
Shafts are OK, just a little polished.

kli is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
2003, bearing, cam, follower



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cam follower bearing Bergerwithdlot Mechanical 20 January 18th, 2012 01:55 AM
570 cam follower bearing wear? pedroFS Mechanical 0 January 3rd, 2011 01:56 PM
cam follower bearing help rich43 Mechanical 6 July 25th, 2008 03:38 AM
follower bearing Taffy Mechanical 8 December 20th, 2007 09:04 AM
Pre '04 cam follower bearing Parsko Mechanical 12 July 9th, 2007 07:29 AM


Facebook Twitter Google+ RSS Feed