Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
March 4th, 2014, 07:20 AM   #1
Junior Member
 
Joined: Feb 2014
From: Capetown

Posts: 15
Thanks: 10

I Ride:
1992 FE350 conrod

Hi everyone, my name is Chris & I am addicted to Bikes............

My real problem is that i bought a 1992 FE350 that requires a conrod kit. the dimensions are

overall length 167mm
width small end 18.8mm
width big end 18.8mm
big end Id 37mm
pin Od 30mm
pin length 60.90mm
small end Id 18mm
center to center 124.67 mm

these are the best dimensions that i can get off the old rod. failing which i have a 1985 husky wr250 liquid cooled motor which should fit but i would like to keep it standard. I have a number of old Husky's and believe the next step in the development for my collection is the berg

any help would be appreciated
thanks Chris
chrisl is offline  
 
March 4th, 2014, 02:42 PM   #2
Senior Member
 
zaga's Avatar
 
Joined: Mar 2009
From: Portugal

Posts: 1,386
Thanks: 247

I Ride: KTM 300 XC
Re: 1992 FE350 conrod

Hi Chris, WELCOME !!

It looks that you suffer from the same disease that most of do

Originally Posted by chrisl
Hi everyone, my name is Chris & I am addicted to Bikes............
The guys that is really in to the rods thing is bushie, ask him maybe he can help you ??


ZAGA
zaga is offline  
March 5th, 2014, 08:52 AM   #3
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,599
Thanks: 433

I Ride: Husaberg FE501e 2003
Re: 1992 FE350 conrod

that was a joke right Zaga....

Taffy
Taffy is offline  
March 5th, 2014, 03:05 PM   #4
Senior Member
 
zaga's Avatar
 
Joined: Mar 2009
From: Portugal

Posts: 1,386
Thanks: 247

I Ride: KTM 300 XC
Re: 1992 FE350 conrod

Right Taffy


Sent from my iPhone while driving like crazy
zaga is offline  
March 7th, 2014, 01:24 AM   #5
Senior Member
 
bushmechanic's Avatar
 
Joined: Jun 2007
From: south east WA Australia

Posts: 3,860
Thanks: 1195

I Ride: 2008 700FK, 2002 628FST
Re: 1992 FE350 conrod

Hi

Carillo can make a rod for you, basic carburised rod without their hardened big end insert for about $330

if you had access to enough technical data you could choose a rod and a piston from different bikes to make it work maybe with some machining

start at the bottom of this pro-x catalog I see a yamaha rod almost right

http://www.pro-x.com/downloads/technical.pdf

or if you like parting with extra money you can wait to see if someone finds one in the rusty spam tin under the couch, if you had $580 you might be able to buy one

good luck
Cheers
Bushie
bushmechanic is offline  
March 7th, 2014, 06:37 PM   #6
Senior Member
 
bushmechanic's Avatar
 
Joined: Jun 2007
From: south east WA Australia

Posts: 3,860
Thanks: 1195

I Ride: 2008 700FK, 2002 628FST
Re: 1992 FE350 conrod

another approach

change the crank to suit a specific rod

viewtopic.php?f=5&t=17474

bushmechanic is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
1992, conrod, fe350



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Selling My FE-501E (1992) buba_zanetti Husaberg 5 February 7th, 2011 06:07 PM
1992 350 clutch inmate Mechanical 2 August 31st, 2010 01:08 AM
1992 350 stator inmate Electrical 5 August 26th, 2010 06:04 PM
1992 FUEL TANK kadlec Husaberg 3 August 21st, 2010 08:48 AM
1992 600 Husaberg... now what? myHusaberg Husaberg 5 April 16th, 2006 01:18 AM


Facebook Twitter Google+ RSS Feed