Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
January 29th, 2014, 11:48 AM   #1
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,100
Thanks: 337

I Ride:
2000 and prior sprocket set up

with the 1996-2000 bikes unable to get a lower cam chain sprocket I'm just checking but I'm sure that the Husky lower one from prior to 1996 will fit? later than this they went to the 219 chain the same as I use in my race cam chain and sprocket set-up.

15/30 then becomes 17/34 or 18/36 but all these are available. so don't let cam chains and their sprockets stop you from rebuilding these......

I'll let you know in the next few days if the lower sprocket (on the end of the crank) fits and if so then they all will and how and which you pick will be up to you.

with regards making the links close just right they are bound to be a little out but Husabergs can run with or without a base gasket under the cylinder and even a skim that leaves the piston a little nearer the head (and still clear at say 1.3+ mm) will be fine.

regards

Taffy
Taffy is offline  
 
January 30th, 2014, 07:44 AM   #2
Senior Member
 
thorgan's Avatar
 
Joined: May 2005
From: Sacramento California

Posts: 120
Thanks: 87

I Ride: "2000" FE600, 1996 FC600, 2015 Beta Xtrainer
Re: 2000 and prior sprocket set up

An update I await with bated breath!

Thanks for looking into this Taffy. I have a total of three old Husaberg engines and I want to keep them running for a long time. Two are 600's of about '96 vintage and one is a 501 of '95 vintage.
thorgan is offline  
January 30th, 2014, 09:11 AM   #3
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,100
Thanks: 337

I Ride:
Re: 2000 and prior sprocket set up

well there are a few then that appreciate what I'm trying to do! thanks mate!

regards

Taffy
Taffy is offline  
January 30th, 2014, 09:32 AM   #4
Senior Member
 
Joined: Nov 2007
From: Sweden Olofstrom

Posts: 377
Thanks: 13

I Ride: Husaberg FE 400 00, Husaberg Fe450 07, Husaberg FC 600 -99, Yamaha FJ1200 -86 Yamaha RD350 -84
Re: 2000 and prior sprocket set up

And so do i.
Regards
Jampe
jampe is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
2000, prior, set, sprocket



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Show of support for John Prior ORANGEBERG bushmechanic Marketplace 32 June 6th, 2017 05:14 PM
Cam Sprocket 01-501 Mike6007 Husaberg 22 April 10th, 2013 04:01 AM
Sprocket interchangabilaty? ktmbigfan Husaberg 11 July 27th, 2009 06:05 AM
sprocket where to get? speed2need Wheels and Tires 4 June 13th, 2005 04:53 PM


Facebook Twitter Google+ RSS Feed