Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs

Thanks Tree2Thanks
  • 2 Post By Borg
LinkBack Thread Tools Display Modes
October 26th, 2013, 03:56 AM   #1
Junior Member
Joined: Oct 2013

Posts: 5
Thanks: 0

I Ride:
Husaberg fe501 compression cable

I have a 1994 husaberg fe 501 enduro

Does anyone know what manual decompression leaver and cable would fit and were to get it from as they don't make them to fit this bike anymore

Husaberg420 is offline  
October 26th, 2013, 06:19 AM   #2
Senior Member
Joined: Nov 2001
From: Ely, England

Posts: 16,022
Thanks: 495

I Ride: Husaberg FE501e 2003
Re: Husaberg fe501 compression cable

the parts books say that 170 023 01 was used from 1989 to 1998

the 1999 manual shows no decomp cable at all but it must surely be a mistake?

then you're onto the cable over the Hydraulic clutch from 2000-2003. code for 2000-2003 plus starts with 170 078 01 and ends with the KTM part number 80036065000

the KTM part number 590 02 094 000 is then used from 2004-2008.

I suggest you get 170 078 01 / 80036065000 and see what happens? a perch can be easily bought as an aftermarket item.

Taffy is offline  
October 28th, 2013, 10:01 AM   #3
Senior Member
zaga's Avatar
Joined: Mar 2009
From: Portugal

Posts: 1,386
Thanks: 248

I Ride: KTM 300 XC
Re: Husaberg fe501 compression cable


My 97 and my 98 bikes, didn't come with decomp cable. (both elduro = e start)

zaga is offline  
October 29th, 2013, 05:30 AM   #4
ned37's Avatar
Joined: Dec 2004
From: back in cottonwood, az

Posts: 2,388
Thanks: 214

I Ride: '08 HUSKY te610
Re: Husaberg fe501 compression cable

none of my 98's did either: 600E, 400 and 400E.
must have been a supplier problem.
ned37 is offline  
October 29th, 2013, 05:48 AM   #5
Junior Member
Joined: Oct 2013

Posts: 5
Thanks: 0

I Ride:
Re: Husaberg fe501 compression cable

Its a 1994 501 it has a auto decompression built in but also space were a manual cable would go

When i kick the bike the auto decompression only kicks in for a few cranks and goes solid i have been told if i fit the manual decomp then it should over ride the auto decomp

But my problem is i cant find the right cable and leaver to fit

Any help?
Husaberg420 is offline  
September 4th, 2015, 03:17 PM   #6
Junior Member
Joined: Sep 2015
From: Vancouver WA

Posts: 6
Thanks: 5

I Ride:
I know this is a very old thread but I just called Terry Cable and they make all the cables still.
Thanks from husabutt and Rainerio
Borg is offline  

  Husaberg Forum > Mechanical and Technical > Mechanical

cable, compression, fe501, husaberg

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
94 husaberg fe501 for sale on e-bay (300.00) PHILD520 Husaberg 0 December 23rd, 2010 11:30 PM
clutch cable for 97' fe501 trigger Husaberg 1 April 7th, 2010 08:43 AM
dell orto choke cable (yes cable!) Taffy Fuel 2 October 10th, 2009 12:15 AM
Lost Compression 02 FE501 ADryden23 Mechanical 1 June 3rd, 2009 09:20 AM
husaberg fe501 oil consumption mrjimh Mechanical 6 August 12th, 2006 06:58 PM

Facebook Twitter Google+ RSS Feed