Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
October 6th, 2013, 01:18 PM   #1
Senior Member
 
Joined: Sep 2003
From: USA,Eugene, Oregon

Posts: 121
Thanks: 0

I Ride:
how to remove inner clutch hub

I removed lockwasher and nut and the hub does not just come right off like implied in manual. how do I remove clutch hub and basket without breaking anything? any advise would be appreciated Sorry it is a 2006 fe 650
wooleyberger is offline  
 
October 6th, 2013, 01:42 PM   #2
Senior Member
 
Joined: Feb 2009
From: Birdwood South Australia

Posts: 274
Thanks: 15

I Ride: 70 degree fe450 2012 & Aprilia Dorsoduro
Re: how to remove inner clutch hub

If lock washer is folded back use a rattle gun and it should come off easy.
birdwoodburg is offline  
October 6th, 2013, 01:49 PM   #3
Senior Member
 
Joined: Nov 2010
From: montreal,Canada

Posts: 235
Thanks: 17

I Ride: 2005 fs650
Re: how to remove inner clutch hub

if you've removed the 27mm nut and the lockwasher than the inner clutch hub should slide right off. Maybe try tapping the inner clutch hub with a hammer. It could be that the inner splines of the clutch hub are a stuck to the primary transmission shaft. behind the inner clutch basket there's a two U shaped locking shims and a locking washer that holds them in place. Remove those and the outer clutch basket should slide right off.
helithumper is offline  
October 6th, 2013, 04:03 PM   #4
Senior Member
 
Joined: Aug 2011
From: Ontario, Canada

Posts: 916
Thanks: 95

I Ride: 01 Husaberg fe650
Re: how to remove inner clutch hub

I use a puller just to break the initial tension, then it slides off.
Kayeffess is offline  
October 7th, 2013, 01:53 PM   #5
Senior Member
 
Joined: Sep 2003
From: USA,Eugene, Oregon

Posts: 121
Thanks: 0

I Ride:
Re: how to remove inner clutch hub

Thanks for input I will try a puller like you said, see how that works.
wooleyberger is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
clutch, hub, remove



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to remove bearing husaberg 600 jim Husaberg 11 August 1st, 2013 03:36 AM
How to remove midpipe? benliao Exhausts 4 October 27th, 2011 04:51 AM
How do I remove this ? Kawasakifreak Mechanical 2 March 29th, 2011 03:30 PM
How do I remove the Mainjet? boheme Fuel 7 January 8th, 2007 05:43 AM
thermostat, remove or not? Ramo1 Cooling Systems 7 May 1st, 2006 08:02 AM


Facebook Twitter Google+ RSS Feed