Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs

LinkBack Thread Tools Display Modes
April 26th, 2004, 02:44 PM   #1
Junior Member
Joined: Feb 2004
From: australia

Posts: 1
Thanks: 0

I Ride:
fe 600 starting

Can anyone give me any tips on starting or bike setup for starting a 1999 model fe600 (no electric start). The bike has been fitted with a manual decompression system at the cost of the automatic decompression. This is the only problem I have with an otherwise fine motorcycle and will cause me to sell the bike if i cannot work out some sort of system. Any help would be greatly appreciated.
mIngram is offline  
April 26th, 2004, 03:41 PM   #2
Senior Member
Joined: Dec 2002
From: Michigan

Posts: 175
Thanks: 6

I Ride:
Kich through twice choke on no throttle

then get just past top dead center turn choke off and let it have it

No throttle if it is jetted correctly it will start.
ENFORCER4 is offline  
April 26th, 2004, 05:03 PM   #3
Junior Member
Joined: Mar 2004
From: USA

Posts: 11
Thanks: 0

I Ride:
what helped me was downloading the hard start guide posted in the download section
minnija is offline  

  Husaberg Forum > Mechanical and Technical > Mechanical

600, starting

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
fx 450 not starting manxrc8 Mechanical 1 October 23rd, 2012 11:14 AM
fe 570 getting hot then not starting buffalo450 Electrical 3 August 3rd, 2010 11:00 PM
Bad hot starting ElSnorro Fuel 11 December 3rd, 2009 08:04 AM
Starting while hot pollo Fuel 2 July 22nd, 2008 02:40 PM
E starting!!? Tris Mechanical 5 April 10th, 2007 06:28 PM

Facebook Twitter Google+ RSS Feed