Husaberg Forum

Husaberg Forum (http://husaberg.org/husaberg-forums.php)
-   Mechanical (http://husaberg.org/mechanical/)
-   -   Fe 570 Conrod repair kit (http://husaberg.org/mechanical/16790-fe-570-conrod-repair-kit.html)

berglsmerg June 29th, 2013 03:44 PM

Fe 570 Conrod repair kit
 
Hello all, I was just tooling about on the inter web looking for a rod kit for my 09 570, I'm having trouble finding aftermarket options would anyone out there have any ideas, I found one genuine supplier asking 500 aud for the rod and 690 for a complete crank ! Ktm crossovers seem hopeless as the berg small end is .040" larger, not sure about the big end though.

berglsmerg July 5th, 2013 03:25 AM

Re: Fe 570 Conrod repair kit
 
Ok, would someone enlighten me in the finish of a conrod small end ? Thinking a ktm 530 rod with some machining in the small end would be a good fix.

andrevdgraaf July 12th, 2013 03:02 PM

Re: Fe 570 Conrod repair kit
 
If you want to check if some parts fit by example KTM 530 you can check it by parts finder
I always use this site:
http://www.ams4ktm.co.uk/category/3-husaberg-parts.aspx
They have a parts finder for Husaberg and KTM

I thougt a 530 big-end doesn't fit a 570

And better put OEM in and check after 5 min running the oil screen
It cost me an extra cilinder

Andre

berglsmerg July 13th, 2013 10:09 PM

Re: Fe 570 Conrod repair kit
 
Thanks for the heads up, have been talking to Carrillo and the lead time is 12-14 weeks IF a 2.300" big end will fit in the cases. Luckily I haven't had a failure yet, just trying to prevent it from happening.

Torque Monster July 14th, 2013 02:52 AM

Re: Fe 570 Conrod repair kit
 
My crank uses a Carrillo H beam rod, it fits but it is not a stock crank.

berglsmerg July 14th, 2013 03:52 AM

Re: Fe 570 Conrod repair kit
 
Sweet as thanks mate, any chance you have the dimensions or Carrillo part # ?

Torque Monster July 14th, 2013 07:11 AM

Re: Fe 570 Conrod repair kit
 
Quote:

Originally Posted by berglsmerg
Sweet as thanks mate, any chance you have the dimensions or Carrillo part # ?


Mine is a stroker crank so no part number to give you. I will see if I can measure it for you, a little buried in the motor but I will be able to get you numbers that will be close.


All times are GMT -8. The time now is 02:49 AM.

Copyright © 2019 Husaberg Forum. All rights reserved.