Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
January 21st, 2013, 11:22 PM   #1
Junior Member
 
Lumpy Cam's Avatar
 
Joined: Dec 2012
From: Innisfail Queensland, Australia

Posts: 14
Thanks: 0

I Ride:
Fs650e adjusting valve clearances

G'day again,

Just a few questions regarding valve clearance adjustment on a Husaberg fs650e.

1. Are both intake and exhaust the same clearance......using the 1/6 turn?......because every other vehicle I've had the intake and exhaust are different measurements?

2. Can I set the intake valve clearances when the exhaust valves are opening.....which would mean intakes are fully closed and able to be set? And vice a versa for the exhaust side? So don't have to find TDC!

Both are probably stupid questions but I'd thought I'd ask! (Taffy be gentle)

Cheers

Cam
Lumpy Cam is offline  
 
January 22nd, 2013, 12:35 AM   #2
Senior Member
 
Joined: Nov 2007
From: Sweden Olofstrom

Posts: 389
Thanks: 17

I Ride: Husaberg FE 400 00, Husaberg Fe450 07, Husaberg FC 600 -99, Yamaha FJ1200 -86 Yamaha RD350 -84
Re: Fs650e adjusting valve clearances

1: Yes 1/6 on both
2: both rockers should feel "loose" before you adjust the clearence.
Regards
Jampe
jampe is offline  
January 22nd, 2013, 12:49 AM   #3
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,441
Thanks: 401

I Ride: Husaberg FE501e 2003
Re: Fs650e adjusting valve clearances

you MUST go for genuine TDC as the safe bet. it isn't hard - just get the two lines on the flywheel up at 12 o clock.

the auto decomp bump is veary near to TDC in cam degrees and I tried to set Husafergs tappets in a hurry without checking that about two Months ago.

bike wouldn't start, it then did and coughed and spluttered.

I knew straight away that I'd tried to 'be clever' and cut a corner.

so go for genuine TDC. use a T-bar and a 17mm socket. you'll be fine!

Taffy
Taffy is offline  
February 1st, 2013, 07:03 PM   #4
Senior Member
 
Joined: Feb 2005
From: Portland, OR 97216

Posts: 779
Thanks: 0

I Ride:
Re: Fs650e adjusting valve clearances

Super sweet call, sounds similar
BOSS is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
adjusting, clearances, fs650e, valve



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Valve Clearances Wiggy Mechanical 7 October 16th, 2018 07:51 PM
video for checking valve clearances dustysweep Mechanical 0 October 28th, 2009 04:35 AM
Valve Clearances? space Mechanical 1 May 18th, 2007 02:52 PM
06Fe450e valve clearances? bigbob Mechanical 15 December 6th, 2005 03:09 AM
Tight Valve Clearances Scoobie Mechanical 10 June 9th, 2005 02:25 PM


Facebook Twitter Google+ RSS Feed