Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
September 17th, 2012, 10:15 AM   #1
Member
 
Joined: Mar 2011
From: Colorado

Posts: 40
Thanks: 1

I Ride:
Magura Clutch Master Cylinder Piston Removal

How do I remove the piston from the clutch master cylinder? There is a piston repair kit (50302032100) I can buy but I can't figure out out to remove the old one? There is no circlip.

Help?
fljar is offline  
 
September 18th, 2012, 12:48 AM   #2
Senior Member
 
zaga's Avatar
 
Joined: Mar 2009
From: Portugal

Posts: 1,386
Thanks: 247

I Ride: KTM 300 XC
Re: Magura Clutch Master Cylinder Piston Removal

Just try to press the clutch

zaga is online now  
October 2nd, 2012, 05:33 PM   #3
Junior Member
 
Joined: Oct 2012
From: Ontario, Canada

Posts: 5
Thanks: 1

I Ride: 09 F570, 13 Fe350
Re: Magura Clutch Master Cylinder Piston Removal

The white washer is held in place by 3 tabs on the outer edges.
My approach was to push the piston in (master cylinder disconnected from hose), and with a small flat screw driver pop the washer out by a slight prying pressure.

Notes:
1) if you snap the washer, you will need the rebuild kit or a new part.
2) If you goto magura to get a rebuild it, its much cheaper than ktm.
Baarrrrrrryyyyy is offline  
October 28th, 2012, 09:32 AM   #4
Junior Member
 
Joined: Oct 2012
From:

Posts: 1
Thanks: 0

I Ride:
Re: Magura Clutch Master Cylinder Piston Removal

Hay alguien que pueda colocar fotos aquí?
gracias
discipulo is offline  
February 25th, 2015, 02:28 PM   #5
Member
 
Whosaberg's Avatar
 
Joined: Jan 2014
From: Vancouver Island, BC

Posts: 59
Thanks: 18

I Ride: Husaberg FE390, 2014 Zook1000, 2018Z900RS
I second that. No circlip, just the white (delron) tabbed washer. Don't make the mistake of buying the KTM version (which has a circlip and an ordinary non tabbed delron washer). Took mine apart last night, looking for circlip...thought I had lost it (pinged out perhaps), but then had a devil of a time getting the white delron washer out...until I realised it was doubling as washer and clip.



Originally Posted by Baarrrrrrryyyyy View Post
The white washer is held in place by 3 tabs on the outer edges.
My approach was to push the piston in (master cylinder disconnected from hose), and with a small flat screw driver pop the washer out by a slight prying pressure.

Notes:
1) if you snap the washer, you will need the rebuild kit or a new part.
2) If you goto magura to get a rebuild it, its much cheaper than ktm.
Whosaberg is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
clutch, cylinder, magura, master, piston, removal



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Clutch master cylinder leaking Juicifer Tech 2 January 26th, 2016 01:12 PM
Clutch master cylinder.....? help! canolman Husaberg 3 January 6th, 2014 12:13 PM
FE 570 Clutch Master Cylinder Fluid Loss monstermaniac Tech 7 January 25th, 2013 11:35 PM
LHRB in stock Magura clutch master Pro_Marinero Wheels and Tires 30 May 28th, 2008 02:22 AM
Clutch master cylinder: what fits? LeFrog Mechanical 1 October 15th, 2007 09:36 AM


Facebook Twitter Google+ RSS Feed