Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
December 8th, 2011, 07:57 AM   #1
Junior Member
 
Joined: May 2011
From: xxx

Posts: 18
Thanks: 0

I Ride:
Tools for fe 450 engine rebuild

Hi,
Can engine rebuild of a 2009 fe 450 be done without special tools? Service manual says a few ktm/husa spesific extractors and such are needed.
tumpelo is offline  
 
January 24th, 2012, 11:28 AM   #2
Junior Member
 
Joined: Dec 2011
From:

Posts: 2
Thanks: 0

I Ride:
Re: Tools for fe 450 engine rebuild

Most likley. If one look in the workshopmanual one need a whole lot of special tools but in my experiance one can almost always make something upp, use something simmilar, or in worst case build your own tool.
Is it a large rebuild you´r planning to do? Something broke?
Wheeler is offline  
January 27th, 2012, 04:51 AM   #3
Junior Member
 
Joined: May 2011
From: xxx

Posts: 18
Thanks: 0

I Ride:
Re: Tools for fe 450 engine rebuild

Thanks. Got the job done, already finished the full 90h rebuild, plus also changed both main axle bearings. Had to use some creativity at some points and get on with general tools. Only conrod was changed in a shop. Learned a lot, it was a rewarding process, quite nerve cracking to start the engine after rebuild.
tumpelo is offline  
January 27th, 2012, 08:41 AM   #4
Junior Member
 
Joined: May 2011
From: England

Posts: 14
Thanks: 0

I Ride:
Re: Tools for fe 450 engine rebuild

I did my 450 2010 and all I needed other than usual tools was the flywheel puller.
leotech is offline  
January 28th, 2012, 11:01 AM   #5
Junior Member
 
Joined: Dec 2011
From:

Posts: 2
Thanks: 0

I Ride:
Re: Tools for fe 450 engine rebuild

Great job tumpelo, lern by doing, best way. You always get is together one way ore another. At forums, like this one, there are always someone who knows. (:
Wheeler is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
450, engine, rebuild, tools



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tools for engine strip? Freaky Mechanical 18 May 6th, 2009 12:22 PM
My engine rebuild DaleEO Mechanical 33 November 7th, 2008 04:37 AM
Engine Rebuild BelgiqueBasterd Mechanical 2 November 8th, 2006 09:35 AM
Pre 2001 Engine Tools Parsko Mechanical 0 June 15th, 2005 08:41 PM
Buying tools for engine repair klemen-SLO Husaberg 6 August 9th, 2004 07:58 AM


Facebook Twitter Google+ RSS Feed