Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
July 18th, 2011, 10:58 AM   #1
Junior Member
 
Joined: Apr 2011
From: Finland

Posts: 26
Thanks: 0

I Ride:
air in clutch?

hello!

my berg has been working fine, except clutch is not perfect. when engine is cold or warm clutch works fine, but after riding like 30mins or more and i pull the lever, i feel the pressure only at very bottom of the lever. It feels like there would be air in clutchfluid. Its strange because it does it only when its warm.. Should i bleed it?

ty already.
Dukkinen is offline  
 
July 20th, 2011, 11:30 PM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,703
Thanks: 452

I Ride: Husaberg FE501e 2003
Re: air in clutch?

I would fit a new O ring on the slave piston and then using a syringe = bleed in reverse = upwards.

regards

Taffy
Taffy is offline  
July 21st, 2011, 09:10 AM   #3
Member
 
Joined: Aug 2010
From: Parkdale, OR

Posts: 51
Thanks: 0

I Ride:
Re: air in clutch?

Mine started doing the exact same thing after I installed a Revloc Dyna Ring.

I was thinking it might be because I installed the Dyna Ring with the bike laying completely on it's side....? When I torqued down the pressure plate, fluid squirted out of my master cylinder reservoir. I thought that maybe I got some air in the system then??? After I bled it, it was acting a bit better, however it still barely works after it gets warm????
brandonB1 is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
air, clutch



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Slipper clutch & clutch 03-08 into 02 sean999r Mechanical 5 August 28th, 2013 11:27 AM
tube clutch: retro adapted for a clear clutch Taffy Mechanical 1 November 17th, 2010 12:47 AM


Facebook Twitter Google+ RSS Feed