Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs

LinkBack Thread Tools Display Modes
April 13th, 2011, 01:24 PM   #1
Senior Member
Joined: Nov 2007
From: Sweden Olofstrom

Posts: 389
Thanks: 18

I Ride: Husaberg FE 400 00, Husaberg Fe450 07, Husaberg FC 600 -99, Yamaha FJ1200 -86 Yamaha RD350 -84
650 SM 02 rebuild

Hello boys.
Just bought a SM 650 -02.
The liner is damaged and suppose the piston is too.
What are the "must do" and change when the engine is on the bench?

Liner cost`s about 3450:- SKR or 340£ here in Sweden and a Wössner piston on Ebay about 126£.
Are the liner cheaper in England?

jampe is offline  
April 13th, 2011, 02:59 PM   #2
Senior Member
Joined: Nov 2010
From: montreal,Canada

Posts: 235
Thanks: 17

I Ride: 2005 fs650
Re: 650 SM 02 rebuild

check with taffy, he's got what you need for your engine. you might need new main bearings and a new big end bearing. just something to look at if the motor is open.
helithumper is offline  

  Husaberg Forum > Mechanical and Technical > Mechanical

650, rebuild

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Fe 570 rebuild Whitestarz Mechanical 4 February 23rd, 2012 11:47 AM
FX 470 rebuild mito Mechanical 2 August 2nd, 2009 11:25 PM
My engine rebuild DaleEO Mechanical 33 November 7th, 2008 05:37 AM
strip and rebuild Taffy Husaberg 2 June 23rd, 2008 04:16 PM
Rebuild or not rebuild - that is the question! Coastie Mechanical 20 August 9th, 2007 02:17 PM

Facebook Twitter Google+ RSS Feed