Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
October 5th, 2009, 04:41 PM   #1
Junior Member
 
Joined: Oct 2009
From: Adelaide, South Australia

Posts: 5
Thanks: 0

I Ride:
Clutch slave Cyl siezed FS650e05

Hi all,
While riding my FS650e05 the clutch stopped working. I've checked the master Cyl and there is plenty of oil in it (ie no leaks), I havent pulled it apart as yet but it appears that the slave cly siezed in the open position. The clutch hasn't been adjusted etc and I believe it has the correct oil in it (has only been serviced by dealer).

I rocked the back wheel while in gear and its seems to have freed itself and have pressure on the lever again, though havent riden it.

Any ideas on what might have happened ?

Any suggestions on cleaning etc ?

Thanks,
Hubs
Hubs is offline  
 
October 6th, 2009, 12:39 AM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,157
Thanks: 523

I Ride: Husaberg FE501e 2003
RE: Clutch slave Cyl siezed FS650e05

welcome to UHE hubs. lets start by having your location and machine in your scribble so we know a bit more about you that we don't have to keep asking you?

ok so the service mechanic used mineral oil right? i would have said that for it to go for no reason is very strange and if the service was very recent i'd say, 'no' he didn't use the right juice. they go in under a fortnight with the wrong juice in it.

simply change all the fluid to be sure and just buy a 50 cent 'O' ring for the slvae piston. you need a stringe though to back bleed it.

regards

Taffy
Taffy is offline  
October 6th, 2009, 02:42 AM   #3
Junior Member
 
Joined: Oct 2009
From: Adelaide, South Australia

Posts: 5
Thanks: 0

I Ride:
RE: Clutch slave Cyl siezed FS650e05

Hi all,
update on above, yes the slave cyl has siezed open, caused by the clutch inner housing snaping off the main drive shaft, allowing too much fee play for the slave piston to handle.
Fortunatly appears that the inner housing is the only thing to have suffered serious damage. Hopfully this is one of those rarity failurs

Cheers
Hubs
Aussie FS650e05
Hubs is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
clutch, cyl, siezed, slave



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need a new clutch slave ! tocou Mechanical 3 March 16th, 2013 07:38 AM
Clutch Slave Cylinder O-Ring SuperMotoMike Mechanical 27 October 20th, 2012 12:57 PM
Clutch slave leak? WWJ Mechanical 2 April 20th, 2010 09:55 AM
engine removal and clutch slave cyl. pastullo Mechanical 5 March 26th, 2009 01:03 AM
clutch slave question jaryrigged Husaberg 4 May 18th, 2008 10:04 AM


Facebook Twitter Google+ RSS Feed