Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
August 2nd, 2009, 08:38 PM   #1
Junior Member
 
Joined: Jan 2009
From:

Posts: 16
Thanks: 0

I Ride:
FX 470 rebuild

Hi, the saga of my 01 470 rebuild continues. Iv'e made a new liner, rebuilt the dogs on the g/box, rewelded the swingarm boss crankcase crack now only to find a crack in the crank radiating from the large lightening hole to to crank edge on the drive side flywheel. Im seriously considering making my own crank, and if I do so, will look at alternate pin and rod kits which are a bit more friendly on the wallet. Before I get that keen, is there anyone in NZ or Oz with a set of crank wheels to effect a repair. It's getting to the stage there is bugger all Husaberg bits left in my bike given all the bits that have been rebuilt. Cheers, Stu
mito is offline  
 
August 2nd, 2009, 08:52 PM   #2
Moderator
 
berger's Avatar
 
Joined: Apr 2002
From: Phoenix Arizona

Posts: 3,146
Thanks: 9

I Ride: the pine
Can you have it welded?
berger is offline  
August 2nd, 2009, 10:25 PM   #3
Junior Member
 
Joined: Jan 2009
From:

Posts: 16
Thanks: 0

I Ride:
Nah....not really. it's very thin through that section. It's likely it would never cause any bother because the crack doesn't go anywhere but because some muppet has attempted a back yard balancing job with a disc grinder on the webs, I feel obliged to tidy the whole assy up.
mito is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
470, rebuild



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fe 570 rebuild Whitestarz Mechanical 4 February 23rd, 2012 10:47 AM
650 SM 02 rebuild jampe Mechanical 1 April 13th, 2011 01:59 PM
My engine rebuild DaleEO Mechanical 33 November 7th, 2008 04:37 AM
strip and rebuild Taffy Husaberg 2 June 23rd, 2008 03:16 PM
Rebuild or not rebuild - that is the question! Coastie Mechanical 20 August 9th, 2007 01:17 PM


Facebook Twitter Google+ RSS Feed